Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Gateway > LAN — dhcp server config Page
Experienced network administrators only can use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — advanced page fields
FieldDescription
LAN IP Address The SBG1000 LAN IP address, in
Starting IP Address Sets the starting IP address assigned by the SBG1000 DHCP server to clients, in
#of DHCP Users Sets the number of clients for the SBG1000 DHCP server to assign a private IP address. There are 253 possible client addresses. The default is 253.
DHCP Server Lease | Sets the time in seconds that the SBG1000 DHCP server leases an IP address to a client. The |
Time | default is 60 seconds. |
Domain Name | Sets the domain name for the SBG1000 LAN. The default is None. |
Time To Live | Sets the TTL (hop limit) for outbound packets. The default is 64. |
Interface Maximum | Sets the SBG1000 LAN MTU, in bytes. The minimum is 68 bytes. The default is 1500 bytes. |
Transmission Unit |
|
Apply | Click to apply your changes. You must reboot the SBG1000. |
Home Print
X | 50 | SBG1000 Wireless Cable Modem Gateway User Guide |
Exit |
|
|
