3..Using the Live Mode
3.5Manual configuration (continued)
n Automatic connection failed.
The reason is that the IP address set in the projector is the global address.
Following the instruction by the network administrator, set the IP address and Subnet mask in the “Live Viewer 3”.
After input these address, click [Connect].
If you want to erase the information you input, click [Reset].
NOTE • If the IP address you input to the PC is the same as the one set in the projector, a warning message will come up. Please choose an IP address that is currently not in use.
n A Network Configuration Conflict exists.
The message comes up when the network connection mode you set in the PC does not match with the mode of the projector.
Please verify your network configuration setting on the projector and PC.
Click [Exit], then the “Live Viewer 3” main menu is displayed even though the network is not established. Click 
on the main menu to go back to the item 3.3.3 Connecting to the network. (&31)
48
