3.. Using the Live Mode
3. Using the Live
Mode
The section is intended to explain the process to use the projector in the Live Mode.
The outline of the process is as follows.
1)Install the “Live Viewer 3” (&23)
2)Quick Connection to the network (&26)
The Quick Connection feature prepares some options to connect your network. You can select one that meets your requirement.
-Passcode connection
-Profile data connection
-History record connection
-My Connection
-Manual connection
3)Confirm the connection to your destination (&50)
In some case, there are several projectors connected to the same network. Before you send your image, confirm that the right projector is selected.
4) Start the Live Mode (&54)
The “Live Viewer 3” main menu will be on screen.
Now, you can send your images to the projector through the network.
Fig. 3 “Live Viewer 3” Main menu
20
