Roland VR-700 System Settings, About master tune, USB Driver, USB Memory Mode

Various Settings (Function mode)

System Settings

With the Group already selected, press the [+] button or [–] button until is shown in the display.

*Settings for parameters other than Key Transpose are saved in system memory. After editing these, press the [WRITE] button to save the settings in system memory (p. 51).

*The Key Transpose setting is saved separately for each favorite.

Button	Parameter	Value			Factory setting
[PIANO]	Master Tune	415.3–466.2 (Hz)			440.0 (Hz)
[E.PIANO]	Key Transpose	-6–5 (semitone)			–
			Notes will sound at a
			fixed loudness regardless
			of how strongly you play
			Lighter-feeling keyboard
			touch
[STRINGS]	Key Touch				Normal
			Normal
			Heavier-feeling
			keyboard touch
	Key Touch Velocity
[CHOIR/SCAT]	Specifies the strength of the notes when Key	1–127		100
	Touch is turned OFF.
	Quick Firing
	Enables the Quick Firing function for the organ.
[BRASS]	Turning this OFF will make the keyboard less	OFF, ON			ON
	responsive for glissandi or repeated notes, but
	will reduce rebounding (bouncing) when you
	release a key.
			Internal clock
[SYNTH LEAD]	Clock Source				Internal clock
			MIDI clock
[SYNTH PAD]	Clock Out	OFF, ON			OFF
			Use the computer’s
			standard driver (Generic)
[GUITAR]	USB Driver				Generic
			Use the dedicated driver
			software (Original)

[BASS]

USB Memory Mode

-1-, -2-

-2-

* The shaded parameters are stored in system memory.

About master tune

This adjusts the basic pitch of the entire VR-700. The display will show the numerical value of the reference pitch (Hz) with the 100’s place omitted. For example, if the display indicates “38.5,” the reference pitch is 438.5 (Hz).

USB Driver

Specifies the USB driver to use when you connect your computer via the USB MIDI connector. Leave the USB Driver at the “Generic” setting. If you change this to “Original,” you’ll need dedicated drive software in order to connect the VR-700 to your computer. For more about the dedicated driver software, refer to the Roland website.

Roland website: http://www.roland.com/

USB Memory Mode

In certain cases, data reading may be slow or unsuccessful when you connect USB memory to the USB MEMORY connector. If so, you may be able to solve the problem by switching this setting.

59