Roland VR-700 Restoring the Factory Settings Factory Reset, Press the FUNCTION/ENTER button

Getting Ready

Restoring the Factory Settings (Factory Reset)

When you execute the Factory Reset operation, all Favorite settings in the VR-700 and the values of the system parameters that can be edited in Function mode will all be returned to their factory-set condition.

If you want to keep the Favorite settings that are stored in the VR-700 and the values of the system parameters, back them up to USB memory as described in “Backing up Favorites to USB Memory” (p. 48).

1.Press the [FUNCTION/ENTER] button.

The VR-700 will enter Function mode, and the display will indicate

.

2.Use the [–] button or [+] button to make the display

indicate .

3.Press the [STRINGS] button.

The display will indicate .

4.Press the [FUNCTION/ENTER] button.

The display will indicate .

5.To execute the Factory Reset, press the [FUNCTION/ ENTER] button.

The display will indicate	while the Factory Reset is being
executed.

Never turn off the VR-700’s power while the Factory Reset is being executed.

*If you decide not to execute the Factory Reset, press the [DISPLAY/ EXIT] button.

6.When the Factory Reset is completed, the display will

indicates .

Turn the VR-700’s power off, then on again.

26