Topcon CT-80 instruction manual Measurement Under Auto Mode Memo, Setting the Measurement Mode

MEASUREMENT UNDER AUTO MODE

•

MEMO •

Adjust the height of the automatic instrument table so that correct measurement values can be obtained by allowing the patient to undergo measurements in a comfortable position.

Make the patient relaxed so as to secure correct measure- ment values; make sure the patient does not hold his breath or remain tense.

Setting the Measurement Mode

The initial status of the measurement mode is AUTO, upon turning the power ON.

1	Return to the Measurement screen.
2	Press	on the control panel and change the measurement mode display to
	AUTO.

Setting the Measuring Range

In this machine, the measuring range can be switched between 0-30 and 0-60. Normally, the 0-30 range is used, but if the patient's intraocular pressure is high, switch it to 0-60. The initial status of the measuring range is 0-30, upon turning the power ON.

1	Return to the Measurement screen.
2	Press	on the control panel and make the measuring range display 0-30.

33

BASIC OPERATIONS