Topcon COMPUTERIZED TONOMETER, CT-80

4Press MEASUREMENT SWITCH .

The character selected by the blinking icon is inputted.

5Press , , , on the control panel, move the blinking icon in the selection

column to “EXIT” and press MEASUREMENT SWITCH .

The Menu screen is displayed.

HOW TO SET PRINTER PAPER

Auto Setting

1Press the printer cover with your thumb, slide it aside and remove.

PREPARATIONS

■: A space for 1 character (Use this to delete a character, too.)

STEP : The blinking icon of the input column moves right.

BACK : The blinking icon of the input column moves left.

When the right/left end is reached, the blinking icon goes down to the next line.

A message can contain up to 3 lines, 20 characters per line.

Printer cover

Contents

Main INTRODUCTION DISPLAY FOR SAFE USE DISPLAY ICONS MEANING WARNING CAUTION MEANING SAFETY CAUTIONS Page USAGE AND MAINTENANCE PURPOSE USER MAINTENANCE ESCAPE CLAUSE WARNING INDICATIONS AND POSITIONS CONTENT COMPONENTS MAIN BODY COMPONENTS CONTROL PANEL COMPONENTS MONITOR SCREEN COMPONENTS CONTENTS OF PRINTER OUTPUT STANDARD ACCESSORIES PREPARATIONS HOW TO INSTALL THE INSTRUMENT 1 2 3 4 Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page BASIC OPERATIONS Page Page Page Page To move the measuring head vertically, turn the control lever right for raising and left When the machine body needs to be moved slightly back and forth or right and left, Page 5 6 36 7 37 If measurement is not possible under the Auto mode, use MEASUREMENT UNDER MANUAL MODE 1 2 38 Adjust the height of the automatic instrument table so that correct Make the patient relaxed so as to secure correct measurement val- Page 6 7 8 40 If the shape of the inner alignment mark does not change to a Page INDIVIDUAL OPERATIONS HOW TO PRINT OUT MEASUREMENT VALUES 1 2 42 To avoid printer problems due to paper jams, do not feed paper Page Page BEFORE REQUESTING SERVICE CHECKING OPERATIONS REFERENCE OPTIONAL ACCESSORIES SPECIFICATIONS & PERFORMANCE RS-232C COMMUNICATION SPECIFICATIONS Page Page Page Page MAINTENANCE AND CHECKING ACCURACY MAINTENANCE To secure auto alignment and correct measurement values, clean the measuring Clean the glass when CLEAN THE MEASURING WINDOW GLASS is displayed 1 2 3 4 1 2 3 4 5 53 Do not apply unreasonable force to the measuring nozzle This machine must be kept free of dust; apply the measuring window cap and dust When not in use, turn the POWER SWITCH OFF. When placing an order for consumable supplies, tell your dealer the product name, Although the machine is adjusted for optimal screen conditions before shipment, a To adjust the contrast and brightness, move the BRIGHT/CONT. knobs after turning 1 2 55 If paper is jammed inside the printer, printing is not complete. 3 4 SPECIAL NOTES ON CLEANING When the outer cover, operation panel and the like become stained, clean them with 56 Page COMPUTERIZED TONOMETER CT TOPCON CORPORATION 75-1 Hasunuma-cho,Itabashi-ku,Tokyo,174-8580 Japan. Phone:3-3558-2520 Fax:3-3960-4214