HOW to Connect the Power Cable | Topcon COMPUTERIZED TONOMETER

HOW TO CONNECT THE POWER CABLE

	CAUTION	To avoid electrical shock, do not handle the power plug
		with wet fingers.

1	Make sure the POWER SWITCH is OFF.
2	Attach the power cable to the machine body.

3 Plug the power cable into the 3-pin AC receptacle with grounding.

HOW TO CONNECT EXTERNAL I/O TERMINALS

RS-232C OUT

This machine can be connected to another device, including a personal computer via the RS-232C OUT terminal.

1 Connect the cable to the RS-232C OUT terminal of this machine.

2 Connect the other cable end to another device.

RS-232C INOutput terminal Input terminal

This machine can be connected to another device, including a bar code reader via the RS-232C IN terminal.

1 Connect the cable to the RS-232C IN terminal of this machine.

2 Connect the other cable end to the external device.

14

PREPARATIONS

Image 15

Topcon COMPUTERIZED TONOMETER, CT-80 HOW to Connect the Power Cable, HOW to Connect External I/O Terminals

Contents

CT-80 Introduction This instrument features the following Display Meaning Display for Safe USE Icons Prevention item Safety Cautions Icon Prevention item Safety Cautions Purpose Usage and MaintenanceUser Maintenance Escape ClausePage Names of Components Content Main Body Components Components Auto/Manual switch Air check switchControl Panel Components Monitor Screen Components Measurement Screen Auto mode, alignmentMeasurement Screen Manual mode, alignment OK Menu Screen Contents of Printer Output Standard Accessories Preparations HOW to Install the Instrument HOW to Connect External I/O Terminals HOW to Connect the Power Cable Displaying The Menu Screen Initial SettingsMemo Preparations Time/Date Setting Setting The Power Save Time RS-232C INPUT/OUTPUT Settings OFF ↔ MODE1 ↔ MODE2 ↔ MODE3 ↔ MODE4 ↔ Setting The Average Value Mode Setting The Buzzer Message Input Back HOW to SET Printer PaperAuto Setting Step Preparations TF50KS-E2C Manual Setting Preparations HOW to Reset from Power Save Status Air Check Turn on the PowerBasic Operations Preparations Before Measurement Setting the Patient Setting the Safety Stopper ∼10mm Auto Measurement Under Auto Mode MemoSetting the Measurement Mode Setting the Measuring Range Alignment and Measurement Basic Operations Basic Operations Manual mode. Sometimes Auto mode is not available if Manu Measurement Under Manual Mode MemoDisplay of Measurement Values ERR Over Basic Operations Alignment is adjusted correctly. Sometimes the shape Deleting Measurement Values Individual Operations HOW to Print OUT Measurement Values HOW to Correct Measurement Values INPUT/OUTPUT VIA RS-232C Output via RS-232CInput via RS-232C Before Requesting Service Checking OperationsChecking Operations Automatic instrument table AIT-20 and Table Board Optional AccessoriesSpecifications & Performance Reference RS-232C Communication Specifications Connector TypesTerminal Pin Arrangement Transmission Formula Contents of Data Transmission Reference Work ID no Setting RS-232C Communication Conditions Format Maintenance and Checking Accuracy MaintenanceCleaning the Measuring Window Glass Cleaning the Window Glass inside the Nozzle Daily Maintenance Adjusting the Monitor ScreenOrdering Consumable Supplies Replacing the Fuse Paper Jam in Printer Cleaning the Outer Cover Special Notes on Cleaning Computerized Tonometer CT-80 Topcon Omni SYSTEMS, INC Computerized Tonometer