•Data Receiving
Patient ID data | 13 byte |
(Example)
or
or
Setting RS-232C Communication Conditions
In the Menu screen, move the cursor using the 
, 
keys on the control panel, and press MEASUREMENT SWITCH . Further, move the cursor to an item to be changed on the screen shown below, and press MEASUREMENT SWITCH . [SET→∗∗∗∗] is displayed at the bottom of the screen. Change the setting using 
, 
. After changing, the setting is registered by pressing MEASUREMENT SWITCH . After setting, move the cursor to EXIT and press MEASUREMENT SWITCH to return to the Menu screen. For further details, see
Items of setting (5 items) |
|
⋅ Machine No. (EQUIPMENT) | Set value: 0∼99. (For shipment, “1” is set.) |
| When more then one unit of inspection equipment |
| is installed in the same hospital, for example, data |
| can be controlled using these Machine Nos. |
⋅ Input ID mode (ID MODE) | Set value: 1 or 2 (For shipment, “1” is set.) |
| 1. For inputting patients' ID numbers. |
| 2. For inputting the temporary ID numbers of new |
| patients. |
⋅ Work ID No. | Set value: 0∼9999 (For shipment, “0” is set.) |
(WORK ID NO.) | Desired serial numbers can be attached to measure- |
| ment results. The number is automatically added (1 |
| at a time) each time the printing of data communica- |
| tion is performed. |
50
