Hitachi CP-X267 user manual Entering the Passcode, Trouble shooting

3..Using the Live Mode

3.4Passcode connection (continued)

3..4..2 Entering the Passcode

If you select [Enter PassCode] at the item 3.3.3, the “Please enter the PassCode” screen is displayed. Please enter the Passcode divided 4-digit each in 3 boxes (total 12-digit).

Example PASSCODE: 1234 – 5678 - 9ABC

After entering the Passcode, click [Connect] to start the connection to the projector.

Proceed to the item 3.6 Confirm the connection to your destination. (50)

If you click [Back], the screen is back to the item 3.3.3 Connecting to the network. (31)

NOTE • When entering the Passcode, capital and small letters are not distinguished.

•If you are using any encryption code or your unique SSID or Subnet mask excluding ClassA and B and C, it is required to set the connection manually. If the manual setting screen is displayed, please follow the item 3.4.3.

[trouble shooting]

n Incorrect PassCode.

The incorrect Passcode was input.

Click [Back] to return to the “Please enter the PassCode” screen.

Check the PassCode on the projector screen (32) and enter the code again.

34