Enjoying in a car
Enjoying in a car
pDo not leave the unit on a surface that may become hot such as a dashboard. The unit is not
pThe driver must not operate this unit while the vehicle is moving.
Do not operate this unit where it can be viewed by the driver.
Driver operation or viewing of this unit while the vehicle is moving will cause distraction which may result in serious accident and personal injury or property damage.
Enjoying video in the back seat with the Headrest Mounting Bracket
You can enjoy video in the back seat attaching the unit to the back of the front seat. pPlease insert the disc or card before attaching the unit to the headrest bracket.
pDo not attach or detach while driving, and do not attach in the following locations, otherwise it may result in injury or traffic accidents:
pMake sure that the bracket belt is securely fastened, and check the lock on the unit.
In the event of an accident, sudden acceleration, or braking, the unit could become loose and cause injury.
1Attaching the headrest bracket to the front seat.
Adjust the headrest so there is an open space of about 3 cm (1 3/16S).
Headrest Mounting
Bracket (included)
Attach to the seat so that the label side of the bracket can be seen from the rear of the seat.
Close the buckle and adjust the belt until it fits tightly around the headrest.
Side view
If this space is larger than 3 cm (1 3/16S), the unit could become loose and cause injury in the event of an accident etc.
2 Attaching the monitor holder.
Fold the monitor down towards the front | Rotate the monitor backwards so the |
of the unit and attach the monitor holder. | screen is facing out, and lock into place |
Monitor holder | with the monitor holder. |
(included) |
|
Check that the monitor is locked into position.
RQT8231
30
Detaching the monitor
Press the monitor |
| |
holder as shown | Label side of | |
to detach it. | ||
the bracket | ||
|
After use, detach the monitor holder from the unit. You can store it in the bracket.
Check that this part is closed.
30