Panasonic DVD-LV65 warranty CHG indicators, Displays, Maintenance of the lens

Troubleshooting Guide

	Problem	Solution
	The LCD is dark.	Adjust the brightness. I
	The picture is	Some disruption is normal.
	disrupted during fast
	forward and rewind.
	SD moving picture
	quality is poor (jittering
	or blocky).
	No picture on the LCD	Select a picture mode other than “OFF” (no picture)I.
	Picture from another	Check connections. Q
	unit not shown on the
	LCD.	Ensure the input setting is correct. Q
		Ensure the power of the connected equipment is on.
	Picture doesn’t appear	Check connections. P
	on the television (or
	the size of the picture	Check that the television is on.
	seems wrong).
		Check that the input mode on the television is correct.
		Check the settings in “Video—TV Aspect”. Q
	LCD pixels turn black	The LCD is constructed with precision technology so 99.99 % of the
	or radiate different	pixels are active, but of the remaining of 0.01 %, there are pixels that
	colors.	may be black or emit light constantly. This phenomenon is not a
Reference		malfunction.
	[Í] and [CHG] indicators
	The [Í] indicator	The unit has malfunctioned. Consult your dealer.

Displays

On-Screen Menu Icons		Use [3, 4] while the rightmost icon is highlighted to move them
are cut off or are not		down. J
displayed at all.
No On-Screen display.		Go to the Display menu in the SETUP screen, and select “On” for
		“On-Screen Messages”O.
“Check the disc.”		Clean the disc. 9
“X”		You are trying to play incompatible or corrupted data. This data
		cannot be played.
“UNPLAYABLE CARD”		The data cannot be played.
“CHECK CARD”		The card cannot be played or the unit failed to read the card.
		Try reinserting it. >
“NO FILE”		Data the unit can play is not recorded on the card or you haven’t
		inserted a card.
“	ERROR 01”	A problem has occurred with the battery pack. Consult your dealer.
“	ERROR 02”	The battery pack has been recharging for 12 hours but has failed to
		recharge for some reason. Recharge again.
“	ERROR 03”	You are recharging in a location that is too hot or too cold. Recharge
		at normal temperature.
“H∑∑”		Trouble has occurred. The number appearing after H depends on the
∑∑ stands for a		problem. Turn the unit off and on again. Alternatively, turn the unit off,
number.		disconnect the power source (AC or battery pack) reconnect the
“U11”		power and turn the unit on again.
		If the service numbers fail to clear, note the service number and
		contact a qualified service person.

Note	Reference
The following do not indicate malfunction.
≥Sound from the AC adaptor during recharging.
≥The battery pack warms up after recharging or during use.

	flashes rapidly.
	The [Í] indicator	The unit is on and the LCD is closed or the display mode is set to
	flashes slowly.	“OFF” (no picture). Turn the unit off when you have finished.
	The [CHG] indicator	There is a problem with the battery pack. Turn the unit on and check
	flashes rapidly.	the message on the LCD. W
RQT6536
	The [CHG] indicator	Battery pack charge is low. The unit will turn off automatically after a
	flashes slowly.	few minutes. ;

Maintenance

∫To clean this unit, wipe with a

soft, dry cloth.

≥Use eyeglass cleaner to remove stubborn dirt from the LCD.

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instructions that came with the cloth carefully.

∫Maintenance of the lens

≥Remove dust carefully with an air blower for camera lenses (optional).

≥Recommended product:

≥≥Lens cleaner kit (SZZP1038C)

≥≥(Available from Panasonic dealers.)

≥Be careful not to touch the lens with your fingers.

RQT6536

38 39