First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet.
or
Turn the TV on with the POWER button
(TV)(Remote)
or
Setup the following items
●Select your language
●Select your country
●Select your viewing mode (Be sure to select “Home Use”)
If you select “Store Demonstration” by mistake, confirmation screen will be displayed.
To display the “Set viewing mode” screen again in order to select “Home Use”, perform one of the following actions:
•Press and hold down the rear POWER button for at least five seconds.
•Unplug the power cord for 30 seconds and then plug it in again.
●Configure Network connection
Follow the instructions on screen to complete the Network connection.
●ANT/Cable setup
Select and adjust the settings according to your ANT/Cable environment. Select “Yes” on the confirmation screen to start the scanning process. After scanning is complete, press OK to continue.
●Adjust the Clock
Select the clock mode and adjust other settings.
When “Auto” is selected, clock will be set automatically according to Time zone and DST. The TV must be connected to the Internet to use this feature.
●Complete First time setup Completion screen is displayed.
Select type of Home Screen
The “Tutorial” for “my Home Screen” starts.
Follow the instruction of the “Tutorial” to select desired “Home Screen”.
Example: Home screen selection | Example: Lifestyle Screen | |
|
|
|
•“Home Screen” is displayed as the
16