Panasonic TC-L50ET60 Attaching the pedestal to TV, M5 × M4 ×, Installing the remote’s batteries

Attaching the pedestal to TV

Assembly screws	Assembly screws	Bracket	Cover	Base
(silver) (4)	(black) (4)
M5 × 18	M4 × 10
Attaching the pedestal

1

A

C

E

2 D B

3

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

Remove the assembly screw from the cover.

Pull out the cover.

Lift the TV from the pedestal.

Remove the assembly screws from the bracket.

Warning

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

Installing the remote’s batteries

	Pull open	Caution
		Incorrect installation may cause battery
	Close
		leakage and corrosion, resulting in
		damage to the remote control.
		• Do not mix old and new batteries.
		• Do not mix different battery types (such
Hook	Note the correct	as alkaline and manganese batteries).
		• Do not use rechargeable (Ni-Cd) batteries.
	polarity (+ or -).
		Do not burn or break batteries.

9