First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 36) is set to “No”.
Turn the TV On with the POWER button
(TV) | (Remote) |
or | or |
|
Configure your viewing mode
Select your language
Language / Idioma / Langue | Step 1 of 5 / Paso 1 de 5 / Étape 1 de 5 |
Select your language |
|
Seleccione su idioma | select |
Sélection de la langue |
English Español Français
OK
Select 
OK
Selección
Sélection
Select your viewing mode (Be sure to select “Home use”)
Set viewing mode |
| Step 2 of 5 | |
| Select your viewing environment | select | |
| Home use | Store Demonstration | |
|
| ||
|
|
| OK |
Select | OK |
|
|
RETURN |
|
| |
|
|
| |
●Please confirm your selection (Home Use) before pressing OK button.
■If you select “Store Demonstration” by mistake in 
, confirmation screen will be displayed.
You are selecting the store demonstration mode. |
| |
Yes | No | select |
If you select “Yes”, the picture mode will regularly reset
to “Vivid” and a Picture Refresh message will be displayed on the
screen. | OK |
| |
●Select “No” and return to previous screen . |
|
●If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and select “Home Use”, do one of the following:
• Press and hold down the side POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.
Note
●If you use any other step other than then turn the TV off, or if you used the EXIT button to quit before completing the settings, the next time you turn the TV on, “First time setup” will not be automatically displayed.
•The settings up to that point are saved.
•You can start “First time setup”. (p. 36)
●Language, ANT/Cable setup, Input labels and Clock can also be changed in the Settings Menu. (p. 36)
Getting started First Time Setup
Identifying Controls
13