Panasonic TC-P4232C Settings Items Channel surf, Language, Français, Clock, Input labels, Bright

Setup Other function settings

Settings	Items
Channel surf	All/Favorite/
mode	Digital only/
	Analog only

Item Description

Sets the mode to select the channel with the Channel up/down button. Favorite: Only channels registered as FAVORITE. (p. 17)

Language	English/Español/ Selects the screen menu language.
	Français
Clock	Adjusts the clock. (p. 15)

ANT/Cable setup See p. 30-31 for more detail.

Input labels	Selects the terminal and label of the external equipment.
(Display labels	Devices connected to external input terminals can be labeled for easier identification during the
of connected	input selection. (Input select (p. 20))
devices)	Terminals: HDMI 1-2/Component/Video
	Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
	RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/
	OTHER/Not used
	• You can also enter the label name directly. (Entering characters (p. 18))
Anti Image	Pixel orbiter	Enable/Disable	Enable: Shifts the display image automatically.
retention	(Wobbling)
(Prevent Image	4:3 side bars	Off/Dark/Mid/	Changes the brightness of the side bar
retention)	(4:3 mode only)	Bright	The recommended setting is “Bright” to prevent the panel
			“Image retention”. (p. 41)

Scrolling bar	Press “OK” to start the horizontal “Scrolling” on the screen.	[Scrolling bar]
	• Press any key except the POWER key to return to previous
	screen.

• You will return to the previous screen if no key operation has been performed for 15 minutes.

VIERA Link settings See p. 26-27 for more detail.

ECO/energy	No signal for 10	To conserve energy, the TV automatically turns off when NO SIGNAL and NO
saving	minutes	OPERATION continue for more than 10 minutes.
	(Stay on/ Power	• Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.
	TV off)	• “No signal for 10 minutes was activated” will be displayed for about 10 seconds
		when the TV is turned on for the first time after the power was turned off by “No
		signal for 10 minutes”.
		• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
		minutes prior to the shut-off.

No activity for 3 hours

(Stay on/ Power TV off)

To conserve energy, the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours.

•Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set.

•“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 3 hours”.

•The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.

Advanced setup Auto power on		Turns TV On automatically when the cable box or connected device is turned On.
	(No/Yes)	TV AC cord must be plugged into this device. TV turns on every time the power is restored.
	Image viewer	Slideshow/	Sets the playback type to play back SD cards automatically.
	auto play	Thumbnail/	Set later: “Image viewer settings” menu will be displayed repeatedly.
		Set later/Off	“Viewing photo with VIERA IMAGE VIEWER” (p. 21)
First time setup		Restarts the first time setup from “Language” setting. (p. 13)
About		Displays TV version and software license.
Reset to defaults		Performing Reset will clear all settings made with Setup, such as channel settings.
		• Password setting/entering (p. 18)

36