Panasonic TX-20LA2A manual Power On / Off, How to connect the DVD Input terminals, LED Indicator

Audio / Video connections

How to connect the DVD Input terminals

Example of input signal source

DVD PLAYER

Digital TV-SET-TOP-BOX

(DTV-STB)

	Y, PB, PR,		AUDIO		VIDEO
	OUT			OUT	OUT
COMPONENT VIDEO OUT			R	L
PR	PB	Y

R-AUDIO-L	VIDEO	S-VIDEO	R-AUDIO-L VIDEO
MONITOR				MONO
OUT						AV2
			PR/CR	PB/CB	Y	IN
AV1
IN			COMPONENT
MONO

MONO

PR/CR PB/CB Y

Connect the VIDEO or	AV2 IN
COMPONENT VIDEO terminal.

Note:

Component input terminals are used for 525i or 625i signal.

Power On / Off

Remote control signal sensor

Power Indicator

LED Indicator

Standby	: Red
On	: No Light

Connect the mains plug to the wall socket.

Press the switch on the TV set to turn the set on.

To switch the TV set to Standby mode, press the button on the remote control. The TV set can be switched on by pressing

the button again if it was in Standby mode.

Notes:

•This TV will still consume some power as long as the mains plug is still inserted into the wall socket.

•The mains plug shown is an example.

OK

1 2 3

4 5 6

7 8 9

0

TV

9