Panasonic TX-20LA2M, TX-20LA2A manual Fitting remote control batteries, How to use the LCD stand

Fitting remote control batteries

1	2	3
	-
	+
	-
	+
	“R6 (AA)” size
Pull and hold the hook, then	Insert batteries - note correct	Replace the cover.
open the battery cover.	polarity ( + and -).

Do not use rechargeable (Ni-Cad) batteries.

They are different in shape and performance and may fail to ensure correct operation.

Battery cautions

The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the batteries to burst.

Observe the following precaution:

1.Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2.Do not combine a used battery with a new one.

3.Do not mix battery types (example:“Zinc Carbon” with “Alkaline”).

4.Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5.Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.

How to use the LCD stand

Adjust the LCD panel to your desired angle.

The LCD panel can be adjusted the following direction: 5 ° Forward

15° Backward

30° Right

30° Left

(View from the top) (View from the side)

30 30

5