Panasonic NV-VP32 Series manual Before Requesting Service, General, Sound

Page 43

Before Requesting Service

Before requesting service, check the following points once again.

General

No power.

Connect the AC mains lead securely to mains supply.

8

No response when buttons

Some operations may be prohibited by the disc.

pressed.

The unit may not be operating properly due to lightning, static electricity or some other

 

 

external factor.

 

Reset procedure:

 

 

Press [VHS/DVDÍ] to switch the unit to the standby mode and then back to ON.

 

 

Alternatively, press [VHS/DVDÍ] to switch the unit to the standby mode, disconnect the AC

 

 

mains lead, and wait for 1 minute. Reconnect the AC mains lead.

 

 

 

No operations can be performed

Check the batteries are installed correctly.

4

with the remote control.

The batteries are depleted: Replace them with new ones.

4

 

Point the remote control at the remote control sensor and operate.

4

Cannot select alternative

This function depends on software availability.

languages.

Try selecting from the disc’s menu if one is available.

27

 

 

 

The SETUP menu cannot be

Press [DVD].

accessed.

Cancel all program and random play.

30

Cannot operate the unit.

Press [VHS] or [DVD] properly.

Cannot operate the TV.

The unit is in timer recording standby (“ ” is on on the unit’s display).

18

 

10

 

Check the TV maker setting.

 

 

 

 

 

TV reception worsens after

This can occur because the signals are being divided between the unit and the TV.

 

connecting the unit.

It can be solved by using a signal booster, available from audio-visual suppliers. Consult

 

 

your dealer if reception does not improve.

The tape counter isn’t changing.

The tape counter does not change while playing unrecorded parts.

 

The tape is dirty or damaged. Consult your dealer if this is the case.

 

 

 

No on-screen display.

Go to “OPTION” in the VHS menu, and select “AUTO” for “OSD”.

24

 

Go to “Display” in the SETUP menu, and select “On” for “On-Screen Messages”.

41

The menu is displayed in a

Go to “LANGUAGE” in the VHS menu, and select the desired language for menus.

12

different language.

Go to “Disc” in the SETUP menu, and select the preferred language for “Menus”.

41

 

 

 

Sound

No sound.

Check the connections.

8, 9

Distorted sound.

Check the volume on the equipment you have connected.

 

Ensure that the input settings on the other equipment are correct.

 

Turn Advanced Surround off if it causes distortion.

35

 

Output from this unit will be in stereo (2 channels) when Advanced Surround is on. Turn

 

 

Advanced Surround off if you are using three or more speakers.

35

 

Press [ 1] (PLAY) to restore normal play after changing the speed.

28

 

Noise may occur when playing WMA files.

Piercing noise comes from the

If you have connected this unit to other equipment through the OPTICAL DIGITAL AUDIO

 

speakers.

terminal, ensure you have selected the correct settings for “Dolby Digital”, “DTS Digital

 

 

Surround” and “MPEG” in the SETUP menu’s “Audio” menu.

37, 41

 

 

 

There is noise when playing a

Adjust the tracking.

15

video tape.

The tape is old or damaged.

Effects do not work.

Dialogue Enhancer and Advanced Surround do not work when the unit is outputting

 

 

bitstream signals.

 

Advanced Surround does not work if you have changed the play speed.

28

 

 

 

Recording

The picture is recorded with

Check the antenna connection to the unit.

8

noise or a blank screen.

Check your normal TV picture. If there is no picture, check your antenna.

 

 

 

The unit is not correctly tuned. Retune the unit.

11

 

 

 

A1 or A2 has been selected. Select the required TV programme.

 

 

 

The playback picture is distorted when recorded in the EP mode using MESECAM system.

 

 

 

 

We recommend PAL system for recording in the EP mode.

Timer recording doesn’t record a

Check the clock and calendar.

12

programme correctly.

Set the channel and start/end times correctly.

18

 

 

 

Be sure to press [TIMER ] after programming to put the unit in timer recording standby.

18

 

 

 

Programme times may be overlapped.

 

 

 

 

 

 

 

 

 

 

” flashes when I try to start

If the erasure prevention tab has been removed, cover the hole with adhesive tape.

4

 

recording. Cannot record.

 

 

 

 

 

 

 

Editing

Helpful Hints

43

Image 43
Contents DVD Player Video Cassette Recorder Model No. NV-VP32 Series Contents About descriptions in these Operating Instructions AccessoriesFor your safety Condensation may form in the following casesVHS Deck and Cassette Tape Information Remote ControlDisc Information SLP Control Reference GuideMain Unit Unit’s DisplayªVHS and DVD button Control Reference GuideFor better video from DVD ConnectionsBasic Connections Audio/Video Output SocketsAnalog connection ConnectionsTo enjoy sound through other audio equipment Digital connectionCheck whether the TV can be operated properly TV Maker SettingRefer to the chart below for the code of your TV Operating the TVTo change the RF output channel Tuning the TV to Your UnitClock SET Setting Up for VHSPress Menu Press 34 to select the menu Press Enter LanguageProgressive Out Component DVD Quick SetupPress Enter and then Setup to end the settings TV AspectInsert a recorded video cassette tape Press 1 Play PlaybackNtsc Playback Adjusting the playback pictureDuring play, press TRACKING/V-LOCK or While paused, press TRACKING/V-LOCK orMenu 4 Press REC¥ to start recording Press REC Mode to select the recording modeRecording Press Chji buttons to select the TV stationRecording from an external source One-Touch Recording OTRTape Refresh Press Timer RecordingPress PROG/CHECK Press 2 1 to set the date on which TV programme will be broadcastPress PROG/CHECK twice Timer RecordingTo check and cancel a Timer Programme Recording Mode Auto Change FunctionProgramme Search FunctionsJet Navigator Press NaviEasy Programme Playback Search FunctionsVHS Index Search System Viss Press backward or 9 forwardAuto Tuning Settings Using the On-Screen DisplayTuner Preset Press 34 to select Auto Tune Press 2 1 to start Auto TuningSystem Ntsc PB Select OptionTape Select Ntsc Input SelectTo change the audio, press Audio Various indications in on-screen displayPress VHS Status Changing audioPress OPEN/CLOSE to open the disc tray Playing Discs-basic playPlace the disc with the label facing upward Chapter Review Playing Discs-basic playPosition Memory During play, press P.MEMORYQuick Replay Convenient FunctionsStarting play from a selected item Starting play from a selected groupPress AV Enhancer to select On Picture ModeConvenient Functions AV EnhancerProgram Play Changing Play SequenceRandom Play Direct Navigator Playing the Programmes or Play Lists on DVD-RAMPlaying a play list Naming folders and files Using playback menus except Jpeg files on DVD-RAMªUsing navigation menus MP3/WMA, CD text and Jpeg Navigating MenusPlaying HighMAT discs MP3/WMA, CD text and Jpeg Navigating MenusFind Press 1 to select On and press Enter To Enjoy Movies and Music MoreChanging soundtracks, subtitles and angles During play, press AudioAngles DVD-V Effective listening using the front speakers onlyTo Enjoy Movies and Music More Advanced SurroundPress 34 to select Just Fit Zoomand Press 34 to select the preset aspect ratioRepeat Play Variable Zoom functionDolby Digital, DTS Digital Surround and MPEG¢ Digital outputManual Zoom PCM Digital OutputElapsed play time indicator Using On-Screen MenusMain Menu Other settings Using On-Screen MenusPress 34 to select the menu’s tab Changing SettingsPress Setup Entering a password RatingsSetup menu Changing SettingsMenus Items Manual Dubbing Recording from DVD to VHSDVD-RAM Dubbing General Before Requesting ServiceSound Disc play Before Requesting ServiceVHS picture Editing Error MessagesSelf-diagnostic Indications on the unit’s display Disc picture1 ch GlossarySpecifications