Timer Recording, Press PROG/CHECK twice | Panasonic NV-VP32 Series

Timer Recording

Recording Mode Auto Change Function

During a timer recording performed in SP mode, this function automatically changes the recording mode if the unit determines that the remaining tape time is insufficient to record the entire programme. If the remaining tape time is still not sufficient even in LP (EP) mode, the programme cannot be recorded to the end.

The recording mode will change as follows:

PAL system:	SP # LP
NTSC system:	SP # EP

≥This function cannot change the recording speed to the EP mode for PAL system.

e.g. NTSC system (when using a 60-min. tape) Timer programming

1st programme	2nd	programme (60 min.)
(30 min.)	2nd	programme (60 min.)
(30 min.)
Video tape

30 min. at SP	15 min.	45 min.
	at SP	at EP

≥The tape length must be set correctly (l 24). ≥Some tapes may not work correctly.

≥If the recording speed changes during a timer recording, some picture distortion will occur at that point.

To check and cancel a Timer Programme

≥This unit must be turned on, or in timer recording standby mode.

..............................................................................................................................................................................................................................................................................................................................

[1] Press [PROG/CHECK] twice.

The Timer Programme List screen appears.

[2]Press [PROG/CHECK] repeatedly to select the programme.

≥Every time you press [PROG/CHECK], the cursor shifts below. You can also select the programme by pressing [34].

≥When “JET NAVIGATOR” is set to “ON”, press [1] to display the category. Press [1] again to make the previous display appear.

[3] Press [CANCEL/RESET] to cancel.

[4] Press [MENU] to exit the on-screen display.

Notes:

≥If timer recording is not completed (due to insufficient tape or cancellation by the user), the programmed timer recording data will be cancelled from the memory by 4 A.M. two days later. However, if the timer recording function is activated at that time, the programmed timer recording data will not be cancelled.

≥After you cancel the programmed timer recording data, the current recording mode during the stop mode is displayed.

	DATE		CH	ON	OFF
1	29SA	2		20:02	21:30	SP
2	SU-SA	25		10:30	11:00	A
3	SU	14		15:00	16:00	SP
4	19WE	5		22:15	23:30	EP
5	28FR		A1	20:02	21:30	SP
6	30SU	4		19:10	19:55	EP
7	– – – –		– –	– –:– –	– –:– –
8	– – – –		– –	– –:– –	– –:– –
SELECT:				SET:	END:MENU


	DATE		CH	ON	OFF
1	29SA	2		20:02	21:30	SP
2	SU-SA	25		10:30	11:00	A
3	– – – –		– –	– –:– –	– –:– –	SP
4	19WE	5		22:15	23:30	EP
5	28FR		A1	20 02	21 30	SP

VHS Operations

Timer recording for the same programme on the following week (Intelligent Timer)

When you wish to set the timer recording for programmes which will be recorded within 1 week and you have ever recorded the programmes before, you can record them soon with I-TIMER function without entering day and time by buttons.

≥This unit must be turned on, or in timer recording standby mode. ≥Confirm that the TV is on and this unit viewing channel is selected.

≥Insert a video cassette with an intact erasure prevention tab.

[1]Press [I-TIMER] to display the menu for Intelligent Timer on the TV screen.

≥The list of the timer programmes which are recorded before appears.

[2] Press [34] to select the timer programme which you want to record on the following week.

[3]Press [ENTER].

≥The Timer Programme List screen appears.

[4]Press [TIMER ] to switch this unit over to the timer recording standby mode.

Notes:

≥Up to 16 I-Timer Programmes can be memorized.

≥When I-Timer Programmes are increased to more than 16, the oldest one is deleted.


	DAY		CH		ON	OFF
	TU	1			0:22	0:26	LP

SELECT:				ENTERSET:		END:MENU


	DATE		CH		ON	OFF
1	3 TU	1			0:22	0:26	LP
2	3 TU	2			2:39	2:43	LP
3	28 WE	2			2:56	4:00	LP
4	28 WE	1			2:59	4:00	LP