System

Settings Using the On-Screen Display

Manual Tuning

[1] Press [34] to select “CH” and select the channel with [2 1].

..............................................................................................................................................................................................................................................................................................................................

[2] Press [34] to select “CLEAR” and select “OFF” with [2 1].

ªTo select the blanking of a programme position Select “ON”. If you select “ON”, proceed to step 6.

≥To restore the channel again, select “OFF”.

≥Repeat steps 1 and 2 for another unoccupied programme positions to skip during the selection of

the programme positions.

[3]Press [34] to select “AUDIO SYSTEM” then select the broadcasting system with [2 1].

BG: PAL B.G.H/SECAM B.G

I:PAL I

DK: PAL D/SECAM D.K.K1

[4]Press [34] to select “COLOUR SYSTEM” then select “AUTO” with [2 1].

≥The unit automatically distinguishes between PAL and SECAM broadcasts.

≥If the picture lacks of colour when “AUTO” is selected, select “MESECAM” or “PAL”.

[5]Select “SEARCH” with [34] then press [2 1] to start the

Manual Tuning.

≥If the desired TV station has not been tuned, press [2 1] again.

≥Press [MENU] and repeat steps 1-5for each programme position you want to tune to a station. ≥You can also set the programme position directly by entering the number with the numeric buttons

(lbelow).

TUNER PRESET

CH 2
CLEAR	[OFF]
AUDIO SYSTEM	[BG]
COLOUR SYSTEM	[AUTO]
AUTO TUNE
SEARCH	[3]
FINE


CH 2	SEARCH
	END: MENU

CH 2 SEARCH 74

END: MENU

VHS Operations

Direct Tuning

After you select “SEARCH”, press the numeric buttons to select the programme position.

≥For other channels that require tuning, repeat steps above.

[6] Press [MENU] repeatedly until the setting screen disappears.

Fine Tuning

[1] Press [34] to select “CH” and select the channel with [2 1].

[2]Select “FINE” with [34] then press [2 1] to obtain the best tuning condition.

≥Press [ENTER] to return the tuning to its former state.

[3] Press [MENU] until the setting screen disappears.

CH 2		AFC: ENTER
FINE	:		END: MENU

Set the Colour TV System.

[1]Select “AUTO” with [34].

≥The VHS automatically distinguishes between PAL, SECAM/MESECAM and NTSC signals. If the

picture lacks of colour during AV external recording, playback or recording from DVD to VHS, set to “PAL”, “MESECAM” or “NTSC”.

≥When you want to record or play back in black and white, set to “B/W”.

[2] Press [MENU] repeatedly until the setting screen disappears.

SYSTEM

AUTO

PAL MESECAM NTSC B/W

SELECT: END :MENU