Panasonic SC-VK660 Using the timers, Using the play or record timer, Setting the time

Using the timers

-CLOCK / TIMER	Setting the time
–DIMMER

This is a 24-hour clock.

	1	Press [- CLOCK / TIMER] to select “CLOCK”.
		Every time you press the button:
				CLOCK		˚ PLAY			˚ REC
					Original display
	2
		(					)
			Within 7 seconds or so
		Press [4 , / REW] or [¢ ,						/ FF] to set the
		time.
	3	Press [- CLOCK / TIMER] to finish setting the time.
DANSK	To display the time
	Press [- CLOCK / TIMER] once when the unit is on or in

standby mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

PLAY/ REC

Using the play or record timer

–FL DISPLAY

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the external equipment (record timer).

Play timer and record timer cannot be used together.

FRANÇAIS

Turn the unit on and set the clock.

• For the play timer, prepare the desired music

source; cassette (DECK 2 has the priority), disc

number (1 ~ 5), radio or other external equipment,

and set the volume.

• For the record timer, check the cassette’s erasure

prevention tabs (\ page 23) and insert the tape in

DECK 2 (\ page 23) and tune to the radio station

(\ page 22) or select the external equipment

(\ page 27).

1

Press [- CLOCK/TIMER] to select the timer function.

4

Every time you press the button:

-

LANG

CLOCK

˚ PLAY

˚ REC

Original display

˚PLAY : to set the play timer

˚REC : to set the record timer

(Proceed to the next step

within 7 seconds

)

2

(

)

Within 7 seconds or so

Press [4 , / REW] or [¢ ,

/ FF] to set the

“ON” time.

3

Press [- CLOCK / TIMER] to confirm.

4

Repeat steps 2 to 3 to set the “OFF” time.

5

To activate the timer

-

5

Press [ ˚PLAY/REC] to display the timer’s

LANG

indicator.

Every time you press the button:

˚ PLAY

˚ REC

(off)

˚PLAY : to turn the play timer on

RQTV0238

˚REC : to turn the record timer on

(The indicator does not appear if the start and

fi nish times or the clock has not been set.)

6

Press [y] to turn off the unit.

26

The unit must be off for the timers to operate.

To change the settings

Perform steps 1 to 4 and 6 (\ see left).

To change the source or volume

When the unit is on

1	Press [ ˚PLAY/REC] to clear the timer indicator
	from the display.
2	Make changes to the source or volume.
3	Perform steps 5 and 6 (\ see left).

To check the settings

Press [- CLOCK / TIMER] while the unit is on to select ˚PLAY or ˚REC.

The setting are shown in the following order.

–Play timer: start time fi nish time source

volume

–Record timer: start time fi nish time source

When the unit is off

1 Press [- CLOCK / TIMER].

2 During the clock display, press [- CLOCK / TIMER] again.

To cancel the timer

Press [ ˚PLAY/REC] to clear the timer indicator from the display.

(The timer comes on at the set time everyday if the timer is on)

If you use the unit after the timers are set

After using, check that the correct tape or disc are loaded before turning the unit off.

Note:

•The play timer will start at the preset time with volume increasing gradually to preset level.

•The record timer will start 30 seconds before the set time with the volume muted.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, just activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)

SC-VK660_EN(GCS).indd 26 5/4/07 12:00:06 AM