Panasonic TC-L50EM5 Accessories/Optional Accessory, Attaching the pedestal to TV, Rear view

Attaching the pedestal to TV

■Assembling the pedestal

●Fix securely with assembly screws . (Total 4 screws)

●Tighten screws firmly.

	A
C	Bracket
	• Hold the bracket not to
	let it fall.

Front

D

Base

Accessories

Assembly screws (4 of each)

● XSS5+16FJK	● XYN4+F15FJK
size (M5 x 16)	size (M4 x 15)
Bracket (1)	Base (1)
● TBL5ZA33201	● TBL5ZX04901

Getting started

■Set-up

●Tighten assembly screws (total 4 screws) loosely at first, then tighten them firmly to fix securely.

Rear view

●

Rear side

Arrow mark

Hole for pedestal	B
installation	Bracket

Base

Work on a flat surface

WARNING

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.

1.Remove the assembly screws from the TV.

2.Lift the TV from the pedestal.

3.Remove the assembly screws from the bracket.

Accessories/Optional Accessory

Do not disassemble or modify the pedestal.

●Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

●Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

●If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.

●If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (above)

●Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.

9