Panasonic TC-L50EM5 Watching TV, Turn power on, Select a channel number, Closed Caption

Watching TV

SLEEP

Turn power on

(Remote)	(TV)	Note
		●Please select correct input
				(p. 19)
	or	P	U	T
		IN

P	U	T
IN

OK

OPTION

Select a channel number

up

or down

• Also available side [CH] button on the unit.

For Cable/Satellite box connection

- Use your connected box’s remote control.

■To directly enter the digital channel number

When tuning to a digital channel, press the button to enter the minor number in a compound channel number.

example: CH15-1:

Note

●Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu to switch the signal reception between cable TV and antenna (p. 27).

●The channel number and volume level remain the same even after the TV is turned off.

■Other Useful Functions

Listen with SAP (Secondary Audio Programming)

■Select the Audio mode for watching TV

Digital mode

Press [SAP] to select next Audio track (if available) when receiving a digital channel.

Audio track

English (Main Audio)

(example)

Analog mode

Press [SAP] to select the desired Audio mode.

• Each press of [SAP] will change the Audio mode. (“Stereo” / “SAP” / “Mono”)

●SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.

●Contact your Cable or Satellite operator for instructions on enabling SAP with their box.

Closed Caption

■Press [CC] to cycle through the Closed Caption modes

Digital TV:

• “Off ” / “Service1 - 6”

Analog TV:

• “Off ” / “CC1 - 4” / “TEXT1 - 4”

●The selected mode is only set for the program you are watching at the moment.

●Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.

●Contact your Cable or Satellite operator for instructions on enabling CC with their box.

●Closed Caption settings are memorized in “Closed caption” of “Setup” menu.

16