Set Digital TV channel manually Digital TV Manual Tuning
Normally use “Digital TV Auto Tuning” or “Update Channel List” to update Digital TV channels on your channel list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning |
|
|
|
|
|
| select channel | ||
|
|
|
|
|
| ||||
| Frequency | [CH21] |
| 474.00 MHz |
| ||||
|
|
|
|
|
| adjust frequency (set where the level of | |||
| Signal Strength | 0 | 10 |
|
|
|
| ||
| AnalogueSignal QualityScan | 210 | 1068 |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| “Signal Quality” becomes the maximum) |
| No. | Channel Name | Type New | ||||||
|
|
|
|
|
|
|
|
|
|
search
●All channels found will be added to the Digital TV Channel List.
Digital TV: 0
Set Analogue TV channel manually Analogue TV Manual Tuning
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc.)
Manual Tuning
Set Analogue TV channel manually after Analogue TV Auto Tuning.
●Set Sound System and Colour System, and then perform this function.
| Normally set Colour System “Auto”. | |||||||
●If a VCR is connected only with the RF cable, select channel position “0”. | ||||||||
| Analogue TV Manual Tuning |
|
|
|
| |||
| 1 BBC1 |
|
|
|
| CH33 |
| |
| Fine Tuning |
|
|
|
|
|
|
|
| Manual Tuning | 1 |
|
|
| CH33120 | ||
|
|
|
| |||||
| Sound System |
|
|
|
|
| ||
|
|
|
| 5.5MHz | ||||
| Colour System |
|
|
|
|
| ||
|
|
|
| Auto | ||||
Select a channel position | Select a channel | Search and store |
|
| search |
|
| store |
Update channels automatically | Update Channel List | |
You can add new channels, delete dublicated channels, update channel name and position automatically. ●The Digital TV Channel List is updated with the current settings
| AnScanlogue Scan | CH C21 | 689 |
| saved as they are. |
| This will take about 7 minutes. |
|
| ||
| CH | Channel Name | Type Quality |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Display a message New Channel Message
Selects whether to give a message when new Digital TV channels are found. (Off / On)
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Check Digital TV signal Digital TV Signal Condition
Selects a channel and checks the Digital TV signal condition.
Tuning Channels
Advanced
●To change the channel 
Digital TV Signal Condition
Channel Name |
|
|
|
|
| 101 DZFinfokanal | |||
Signal Quality | 0 |
| 10 | |
| ||||
Signal Strength | 0 |
| 10 | |
| ||||
Network Name |
|
|
|
|
| RiksTV | |||
Parameter |
|
|
|
|
| [CH21] 474.00MHz | |||
A good Signal Strength is not an indication of suitable signal for Digital TV
reception. Please use the Signal Quality indicator as follows: | |
Signal Quality: | |
●Green bar | Good |
●Yellow bar | Poor |
●Red bar | Bad (Check the aerial) |
37