![](/images/new-backgrounds/1125558/1255589x1.webp)
Caution
This appliance is intended for use in tropical climates
When cleaning the TV, remove the mains plug
●Cleaning an energized TV may cause electrical shock.
When the TV is not going to be used for a long period of time, remove the mains plug
●This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.
Transport only in upright position
●Transporting the display unit with its display panel facing upward or downward may cause damage to the internal circuitry.
Allow sufficient space around the display unit for radiated heat
Minimum distance
10 |
|
|
10 | 10 | 3 |
|
| (cm) |
●When using the pedestal, keep the space | ||
between the bottom of the display unit and the | ||
surface where the display unit is set. | ||
●In case of using | ||
manual of it. |
|
|
Notes
Do not block the rear air vents
●Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical shock.
Do not expose your ears to excessive volume from the headphones
●Irreversible damage can be caused.
Display panel is made of glass. Do not apply strong force or impact to the display panel.
●This may cause damage resulting in injury.
The display unit is heavy. Handle the display unit by 2 or more people. Support as shown to avoid injury by the display unit tipping or falling.
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty. Typical still images
●Programme number and other logos ●Image displayed in “4:3” mode ●Video game
●Computer image
To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 58)
Keep the TV away from these types of equipment
●Electronic equipment
In particular, do not place video equipment near the TV. Electromagnetic interference may distort images / sound.
●Equipment with an infrared sensor
This TV also emits infrared rays. This may affect operation of other equipment.
Auto power standby function
●If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode.
●The TV will automatically go to Standby mode if there are no signal and no operation between the display unit and the tuner box for a while.
Tuner Box - after 1 minute Display Unit - after 10 minutes
5