Remote control, Selecting TV screen type

The remote control

Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit.

≥Insert so the poles (i and j) match those in the remote control. ≥Do not use rechargeable type batteries.

≥mix old and new batteries.

≥use different types at the same time. ≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries. ≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Getting started

SUBTITLE AUDIO RETURN

Change the setting to suit your television.

The menu language is set to English, but you can change it (➡ page 18, Display—Menu Language). English is used in the examples.

Preparation

Turn on the television and select the appropriate video input on the televi- sion to suit the connections for the player.

1 Press [Í] to turn on the unit.

2 Press [SETUP] to show the menus.

3 Move [2, 1] to select the “Video” tab.

4 Move [3, 4] to select “TV Aspect” and press [ENTER].

5 Move [3, 4] to select the item and press [ENTER].

≥4:3 Pan&Scan (Factory preset)

Select if you have a regular television and to view 16:9 software in the pan and scan style.

16:9 software prohibited from being shown in the pan and scan style will appear in the letterbox style despite the setting here.

≥4:3 Letterbox

Select if you have a regular television and to view 16:9 software in the letterbox style.

Select if you have a widescreen (16:9) television.

Use the television’s screen modes to change the way the picture is shown.

6 Press [SETUP] to end the settings.

To return to the previous screen

Press [RETURN].

RQT6043