Getting Started
ENGLISH - 16
Setting up
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector,
Cautions when setting the projectors
When placing the projector in confined space, a ventilation or air conditioning system must be equipped, and keep enough ventilation space on the rear and both sides of the projector.

Projection method

Setting on a desk/floor and

projecting from front Mounting on the ceiling and

projecting from front

INSTALLATION: FRONT/FLOOR
COOLING CONDITION: FLOOR SETTING INSTALLATION: FRONT/CEILING
COOLING CONDITION: CEILING SETTING

Setting on a desk/floor and

projecting from rear Mounting on the ceiling and

projecting from rear

INSTALLATION: REAR/FLOOR
COOLING CONDITION: FLOOR SETTING INSTALLATION: REAR/CEILING
COOLING CONDITION: CEILING SETTING
NOTE:
• A translucent screen is required for rear projection.
• See more detailed setting up instructions, INSTALLATION and COOLING CONDITION in PROJECTOR SETUP menu on the functional
instructions in the CD that is provided with the projector.
• Do not place or use a projector on top of another projector.
NOTE:
• Do not stack the projectors without using frame or shelf.
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause
damage or injury.
• Avoid heating or cooling air of the air conditioning systems directly blow on to the projector ventilation
openings.
• You can tilt the projector within ± 15 degrees horizontally.
STANDBY(RED)/
ON(GREEN)
LAMP TEMP
FILTER
STANDBY(RED)/
ON(GREEN)
LAMP TEMP
FILTER