Panasonic TC-P54V10, TC-P50V10 quick start Network setting, Viera Cast setting, Select Auto program

Select “Auto program”

ANT/Cable setup		next
ANT in	Cable

Auto program

select

Select scanning mode (ALL channels/Analog only/Digital only)

Auto program		ok
All channels
Analog only
Digital only		select
S l	OK

							Start scanning the channels
Auto program
Progress						8%	Available channels (analog/digital) are automatically set.
	Number of analog channels					10	All channels: Scans digital and analog channels
	Number of digital channels					0
Press RETURN to quit.							Analog only: Scans Analog channels only
			RETURN				Digital only: Scans Digital channels only
	Confirm registered channels
							select “Apply”
program
		Apply		Cancel
l Caption			Favorite		Add
	...		...		Yes		ok
	...		...		Yes
	...		...		Yes

If OK is not pressed after selecting “Apply”, the channels will not be saved. The channel will be saved when no operation is performed for 60 seconds and the “Manual program” menu will also exit automatically.

If you perform scanning more than twice, previously saved channels are erased.

QuickGuideStart First Time Setup

■Press to exit from a menu screen

Note

Network setting

First time setup

Language

ANT/Cable setup

Network setting

VIERA CAST setting

Clock

Input labels

select

ok

Network setting (p. 44-45)

To change setting (Language/ ANT/Cable setup/ Network setting/ VIERA CAST setting/ Clock/Input labels) later, go to Menu screen

(p. 36)

VIERA CAST setting

	select
First time setup
Language
ANT/Cable setup	ok
Network setting
VIERA CAST setting
Clock
Input labels	VIERA CAST setting (p. 46-47)

17