Panasonic TC-P54V10, TC-P50V10 quick start Select Connection test and press OK

Page 45

Check that the network settings are as shown below, and then start “Connection test”.

Select “Connection test” and press OK.

*Press OK again to cancel the test. (It takes a while to cancel the test.)

Network setting

1/2

select

Connection test

Succeeded

 

IP setting mode

Manual

ok

IP address

192.168.0.5

 

Subnet mask

255.255.255.0

 

Default gateway

192.168.0.254

 

Succeeded: “Connection test” succeeded Only home network:

Home network is available.

Failed: Check the broadband environment connection and settings and the network settings, and then perform the test again.

Test in progress

---: Test not yet performed

Select “IP setting mode” and set to “Automatic”.

(When IP automatic acquisition in DHCP can be used)

Network setting

 

1/2

select

Connection test

Succeeded

 

IP setting mode

Automatic

 

 

IP address

192.168.0.5

 

ok

Subnet mask

255.255.255.0

 

Default gateway

192.168.0.254

 

 

■Manual setting

Select “IP setting mode” and set to “Manual”

Select the item and press OK

Check the specifications of the broadband router and enter each IP address.

Subnet mask

0

.

0 .

0 .

0

 

 

 

 

 

 

 

 

The acquired address is displayed.

Each IP address is acquired automatically.

or

change

 

channel

 

 

ok

Network

Select “DNS setting mode” and set to “Automatic”.

(When DNS automatic acquisition in DHCP can be used)

Network setting

1/2

select

Connection test

Succeeded

 

Default gateway

192.168.0.254

 

DNS setting mode

Automatic

 

Automatic

ok

Primary DNS

192.168.0.20

Secondary DNS

192.168.0.21

 

The acquired address is displayed.

■Manual setting

Select “DNS setting mode” and set to “Manual”

Select the item and press OK

Enter each IP address as was specified by the provider.

Primary DNS

0

. 0 . 0 .

0

Setting

Each IP address is acquired automatically.

or

select

If you are using a broadband router, IP automatic

 

ok

acquisition in DHCP can be used under normal

 

 

 

circumstances. If you are not sure, check with the

 

 

person who installed the equipment, or check the

 

 

instructions for each device.

 

 

Advanced

Select “LAN speed setting” (Default is “Automatic”)

 

 

select

Network setting

2/2

LAN speed setting

Automatic

 

 

 

 

LAN speed

10BASE half duplex

 

Software update

 

adjust

MAC address

12-34-56-78-80-ab

 

 

 

 

Normally, select “Automatic”.

If “Connection test” failed, set the “LAN speed setting” to “manual” and then select “10BASE half duplex”, “10BASE duplex”, “100BASE half duplex” or “100 BASE duplex”.

Cannot be selected when the “LAN speed setting” is “Automatic”.

Changing the settings may make it impossible to connect some types of equipment.

Select “Software update”

 

Press OK to start the software update screen.

 

 

 

select

Follow directions of the screen.

Network setting

2/2

 

LAN speed setting

Automatic

 

 

* Set “Clock” first. (p. 18)

LAN speed

10BASE half duplex

 

 

 

 

 

Software update

 

 

ok

 

MAC address

12-34-56-78-80-ab

 

 

 

 

 

 

 

 

The network settings become effective when you close the menu and run “Connection test”.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Viera Guía de inicio rápidoTurn your own living room into a movie theater Image TC-P50V10Viera Cast is a trademark Sdhc Logo is a trademark Contents Important Safety Instructions Safety PrecautionsViera Consumerproducts@panasonic.comSet up Handling the power supply cordAC Power Supply Cord If Problems Occur During UseTransport only in upright position This Plasma TV radiates infrared raysThis may cause damage resulting in injury Typical still images Do not display a still picture for a long timeAccessories Accessories/Optional AccessoryOptional Accessory AccessoriesBottom view Attaching the pedestal to TVDo not disassemble or modify the pedestal Do not use any other TV and displaysAC cord connection LocationTo attach To remove View from aboveBasic Connection Connecting Antenna To watch TVConnecting DVD recorder VCR To record/playback Satellite Receiver SatelliteVCR AV cable connectionsAV Equipment VCRRemote control TV controls/indicatorsIdentifying Controls Front of the TVFirst Time Setup Turn the TV On with the Power buttonAuto channel setup Viera Cast setting Network settingSelect Auto program Press to exit from a menu screenManual setting Adjust the clockAuto setting Set the Input labelsWatching TV Turn power onSelect a channel number Closed caption DisplayInformation Favorite FeatureRecall Change aspect ratio Call upUsing Viera Tools Display Viera Tools Select the itemSelect next Viewing from an SD Card Set SD card setting and select Play SD card nowInsert the SD card Select the movie to be listedSD Card SettingsMovie ChangePress to exit from Photo viewerMenu screen Press to return to the previous screen Return to Thumbnail viewPhoto SortTo sort by Folder, month or date Select sort type Select ViewTo return to TV Press Game to switch to the game screen Display the Input select menu Select the input modeWatching Videos and DVDs Input SelectSelect Viera Link settings Display menu Select SetupSelect Viera Link Select OnTo adjust picture and audio Other settingsDisplay the Home screen Select the item and press OK Operate Viera CastSelect wired or wireless connection Contact your Broadband service providerConnecting to the Internet Internet connectionsStart up Network camera Network CameraBasic operation for Network camera Select Network Camera in Viera LinkNetwork SettingCamera Example of Network Camera connectionDisplaying PC Screen on TV Corresponding signalsDisplay the Input select menu Select PCAdjustments Menu Adjustments/Configurations optionsAdjust or select How to Use Menu FunctionsDisplay menu Select the menuSignal Digital/Component 1/Component 2/Video 1/Video Adjustments/Configurations alternativesContrast/Brightness/Color/Sharpness Tint Record now/Stop recordingHow to Use Menu Functions Display Sub MenuSub Menu list All/Favorite/Digital only/Analog only No/Yes with reminder/Yes no reminderSlideshow/Thumbnail/Movie/Set later/Off Hdmi cable Viera LinkTM Hdavi ControlTMViera LinkTM Connections Setting of this unit after connectionSelect settings Auto power save forSet For Recorder Transmittable data Recorder Home theater PlayerDisplay Viera Link menu Select the item Viera Link control only with the TV’s remote controlSelect Speaker controlAvailable TV’s remote control buttons Select Speaker output Select Home theater or TVSelect Viera Link control Select Network setting Network SettingSelect DNS setting mode and set to Automatic Select IP setting mode and set to AutomaticSelect LAN speed setting Default is Automatic Select Connection test and press OKSelect Viera Cast setting Viera Casttm SettingSelect the item and adjust Connection test Proxy settingProxy port Select the Lock mode Input your 4-digit passwordLock Display menu Select LockChannel lock Change passwordGame lock Program lockSelect ANT/Cable setup Editing and Setting ChannelsCheck signal strength Set manuallyTo cancel the Edit Select a scanning mode pSelect Edit Select the item to be editedClosed Caption Display menu Select Closed captionDisplay Closed caption Select Connected devices Input Labels/Audio outSelect Input labels or Audio out Display labelsDisplay menu Select Timer Using TimerSelect the timer to set Set the timerDVD Recorder Recommended AV ConnectionsTo watch camcorder images To listen to the TV To watch digital video imageAge-based Possible Content Description Group Ratings List for LockSelections Technical Information Closed caption CCAspect Ratio Format Message Data format for SD Card browsingSD Card warning messages Meaning Digital Audio OUT terminalsPro setting Picture modeViera LinkTM Hdavi ControlTM Hdmi connectionSize Input signal that can be displayedSide bars Scrolling barPC Input Terminals Connection Care and CleaningDisplay panel CabinetIntermittent sound FAQActions Screen Sound TV set ProblemSpecifications On-Site or Carry-in Service Limited Warranty CoverageLimited Warranty Limits And Exclusions One Panasonic Way Secaucus, New JerseyAccessory Purchases United States and Puerto Rico Customer Services Directory United States and Puerto RicoPanasonic Product Limited Warranty Limited Warranty for CanadaAnotación del cliente Customer’s Record

TC-P50V10, TC-P54V10 specifications

The Panasonic TC-P54V10 and TC-P50V10 are part of Panasonic's acclaimed Viera plasma series that gained popularity for their stunning picture quality and advanced features. Released in 2009, these models highlight the brand's commitment to delivering an engaging home entertainment experience.

Both models utilize the 1080p Full HD display, ensuring crisp visuals and vibrant colors. The TC-P54V10 features a 54-inch screen size, while the TC-P50V10 comes with a slightly smaller 50-inch display. The larger screen of the TC-P54V10 enhances the viewing experience, making it ideal for larger living rooms and home theaters.

One of the standout features of the V10 series is the Infinite Contrast technology. This innovation allows for deeper blacks and brighter whites, resulting in a more dynamic range of colors. This characteristic becomes particularly evident in dark scenes, where details remain discernible without being washed out.

Additionally, both models come equipped with a 600Hz Sub-field Drive technology. This feature reduces motion blur, allowing fast-moving scenes, such as sports or action films, to appear smooth and well-defined. Viewers often appreciate this technology when watching high-speed content, contributing to an immersive viewing experience.

The V10 series is also notable for its THX certification. Ensuring that the display meets rigorous performance standards, this certification guarantees a high level of color accuracy, contrast, and brightness. This attention to quality is particularly appealing for cinephiles who desire cinematic-quality viewing in their homes.

Panasonic's Viera Cast technology also makes an appearance in the TC-P54V10 and TC-P50V10. This feature allows users to access various web content, including streaming services, social media, and more, directly from the television. It enriches the entertainment experience by providing access to a variety of content without needing external devices.

From a design perspective, both models sport a sleek and modern look, fitting seamlessly into contemporary home setups. The thin bezels and minimalist aesthetics ensure that the focus remains on the display itself, while providing a stylish addition to any room.

In summary, the Panasonic TC-P54V10 and TC-P50V10 plasma televisions excel in delivering excellent image quality, dynamic contrast, and user-friendly features. Their combination of advanced technologies and thoughtful design make them a cherished choice for enthusiasts seeking high-quality home entertainment solutions.
Top Page Image Contents