Speaker Distance to | Adjusts the low frequency sound | |
•If the back space between the TV and wall is over 30 cm, [Over 30cm] | ||
Wall | ||
• Over 30cm | is recommended. | |
•If the back space between the TV and wall is within 30 cm, [Up to 30cm] | ||
• Up to 30cm | ||
| is recommended. | |
MPX | Selects multiplex sound mode (if available) | |
• Stereo | [Stereo]: Use this normally | |
• Mono | [Mono]: When stereo signal cannot be received | |
• M1 | [M1] / [M2]: Available while mono signal is transmitted | |
• M2 | •TV mode only | |
| SPDIF: A standard audio transfer file format | |
| Selects the initial setting for digital audio output signal from DIGITAL | |
SPDIF Selection | AUDIO OUT terminal | |
• Auto | [Auto]: Dolby Digital is output as Dolby Digital Bitstream. | |
• PCM | MPEG are output as PCM. | |
| [PCM]: Digital output signal is fixed to PCM. | |
| •For Video mode (p. 42) or Network video contents (p. 53) | |
HDMI1 / 2 / 3 / 4 Input | Selects to fit the input signal (p. 65) | |
[Digital]: HDMI cable connection | ||
• Digital | ||
[Analogue]: | ||
• Analogue | ||
•HDMI input mode only | ||
| ||
Reset to Defaults | Press the OK button to reset settings of the present [Mode], [Balance], | |
[Headphone Volume] and [Surround] in the Sound Menu to the default | ||
| ||
|
|
How to Use the Menu Functions
| Timer |
| ||
|
|
|
| |
|
|
|
| |
Item |
|
| Adjustments / Configurations (alternatives) | |
Off Timer |
|
|
| |
• Off |
| Sets the time until the TV automatically goes into Standby mode | ||
• 15 / 30 / 45 / 60 / 75 / | ||||
|
| |||
90 minutes |
|
|
| |
Auto Standby |
| Sets the time the TV automatically goes into Standby mode when no | ||
| operation is performed for the selected times | |||
• Off |
| •Automatic input switching with the connected equipment affects this | ||
• 2 / 4 hours |
| function and | ||
|
| •The notification message will appear 3 minutes before going into Standby mode. |
29