Panasonic DMR-ES15 manual Television operation, Set up to match your television and remote control

Page 13

Television operation

You can operate the TV through the unit’s remote control.

Turn TV on/off	Volume
Turn TV on/off
Input Select	Channel
	Select

Point the remote control at the television

While pressing [^ TV], enter the code with the numbered buttons.

e.g., 01: [0] Ô [1]

Manufacturer and Code No.

Brand	Code	Brand	Code
Panasonic/National	01/02/03/	PHILIPS	12
Panasonic/National	04	PHILIPS	12

GOLDSTAR/LG	15/16	SAMSUNG	12/17/18
HITACHI	08	SANYO	14/19

JVC	07	SHARP	11
MITSUBISHI	09/10	SONY	05

NEC	13	TOSHIBA	06

Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation.

•If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television.

When other Panasonic products respond to this remote control

When other Panasonic products placed nearby respond to this unit’s remote control, change the remote control code on the main unit and the remote control (the two must match).

Under normal circumstances use the factory set code “DVD 1”.

To change the code on the main unit 1 While stopped

Press [FUNCTIONS].

2 Press [e,r] to select “To Others” and press [ENTER].

3 Press [e,r] to select “Setup” and press [ENTER].

4 Press [e,r] to select “Others” and press [q].

5 Press [e,r] to select “Remote Control” and press [ENTER].

6 Press [e,r] to select the code (“DVD 1”, “DVD 2” or “DVD 3”) and press [ENTER].

Setup		Remote Control
		Press " " and "ENTER" together
		for more than 2 seconds on the remote
Tuning		control.
Disc
Picture
Sound
Display
Connection	ENTER RETURN
Others	ENTER RETURN

To change the code on the remote control

7 While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds.

8 Press [ENTER].

nWhen the following indicator appears on the unit’s display

Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds.

Note

Executing “Shipping Condition” in the Setup menu returns the main unit code to “DVD 1”. Change the remote control code to 1

(Ô step 7).

To exit the screen

Press [RETURN] several times.

To return to the previous screen

Press [RETURN].

Set up to match your television and remote control

RQT8317

13

Image 13

Contents Example For Australia and N.ZPlease keep this manual for future reference For Middle East and South Africa How to replace the fuseBefore use This Unit is Intended for USE in Moderate ClimatesIncluded accessories Table of contentsDiscs you can use for recording and play Disc information+R DL BeforeDiscs that cannot be played Play-only discsTypes of disc for the type of connected TV InformationDisc handling Remote control informationUnit care Control reference guide Remote controlMain unit 9 blConnection Connecting a televisionMake sure to use the pair of supplied RF coaxial cables Other connections ÔConnection Connecting a television and VCR Connecting a stereo amplifier Connecting an amplifier with a digital input Terminal Other connections ConnectionChannel reception and TV aspect settings Set up to match your television and remote control Set up to match your television and remote control When the following indicator appears on the unit’s displayTelevision operation While pressing TV, enter the code with the numbered buttonsBoth main and secondary audio can be recorded Important notes for recordingAspect Widescreen Recorded in 43 aspect Cprm compatible disc onlyWhen opening the tray without disc finalization When finalizing the discRecording modes and approximate recording times Disc Insertion/EjectionPress 1 2 CH to select the channel Recording television programmesPress * REC to start recording Flexible Recording To specify a time to stop recording -One Touch RecordingPlaying while you are recording Using G-CODEsystem to make timer recordings Timer recordingTo cancel recording when recording has already begun Ô Press G-CodeTimer recording Manually programming timer recordingsTimer icon Press PROG/CHECKTimer recording To cancel recording when recording has already begunPress g Press w,q to select Stop Recording and press EnterCheck, change or delete a programme To exit the timer recording listTo change a programme To delete a programmeInsert a disc Ô Press q Play Playing discsChanging audio during play Press AudioPlaying discs Operations during playSelecting file type to play Using menus to play MP3, DivX and still pictures JPEG/TIFFPress Functions Press e,r to select Menu and press EnterUseful functions during still picture play To select other folder groupUsing menus to play MP3, DivX and still pictures JPEG/TIFF Regarding DivX VOD contentRegarding MP3, DivX and still PicturesUsing on-screen menus Using on-screen menus/FUNCTIONS window and Status messagePress Display Press e, r to select the menuFunctions window Using on-screen menus/FUNCTIONS window and Status messagePress e,r to select an item and press Enter Status messageDeleting titles Using Delete Navigator to delete titlesDeleting titles during play Editing titles/chapters and playing chapters Editing titles/chaptersDelete Title operationsProperties Enter NameCreating playlists Creating, editing and playing playlistsPress e,r to select To Others Editing and playing playlists/chaptersPress e,r to select Playlists Press e,r,w,q to select the playlistDV automatic recording DV Auto Rec Copying from a video cassette recorderManual recording Start play on the other equipmentShow Enter Name screen Entering textPress e,r,w,q to select a character Press g SetDVD Management Creating Top Menu Create Top Menu Enabling discs to be played on other equipment FinalizeClose First Layer To cancel the Child Lock Changing the unit’s settingsChild Lock Tabs Menus OptionsChild Lock/Changing the unit’s settings Summary of settingsDTS Mpeg Changing the unit’s settingsChanging the unit’s settings To change detailed station settings Resetting channel settingPress e,r to select Manual To change the setting all at once PAL ↔ Ntsc Press e,r to select Auto-Setup Restart and press EnterResetting channel setting/TV System Automatic settingSet the clock manually Safety precautionsMessages Set the clock manually/Safety precautions/MessagesOn the television On the unit’s displaySet up Frequently asked questionsPCM Troubleshooting guide RAM Troubleshooting guideTroubleshooting guide RGB GlossaryGlossary/Specifications SpecificationsIndex If you see this symbol

Related manuals

Manual 50 pages 45.6 Kb