Automatic setting
You can restart auto channel setting if the channel reception setting (Ô page 11) fails for some reason.
After performing steps
5 Press [e,r] to select “Auto-Setup Restart” and press [ENTER].
The confirmation screen appears.
6 Press [w,q] to select “Yes” and press [ENTER].
For Australia and N.Z.
•If the Country setting menu appears on the television Press [e,r] to select the country and press [ENTER].
You can also use the following method to restart
Press and hold [2 CH] and [CH 1] on the main unit until the Country setting screen or the
•All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
List of TV Reception Channels
For Australia and N.Z.
Tuner |
|
| Channel | VHF | UHF | CATV | |||
System |
| Coverage | |||||||
|
|
|
|
| |||||
|
| Australia | 45 | ||||||
|
|
|
|
|
|
|
|
| |
| New Zealand | 44 | |||||||
|
|
|
|
|
|
|
| ||
For Asia |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
Tuner System | Channel | VHF | UHF | CATV | |||||
|
|
|
| Coverage |
|
|
|
| |
| OIRT | 44 | |||||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |||||
| CCIR | ||||||||
| |||||||||
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
| Hong |
| – | – | |||||
| Kong |
| |||||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
| China | ||||||||
|
|
|
|
|
|
| |||
|
|
|
| ||||||
For Middle East and South Africa |
|
| |||||||
|
|
|
|
|
|
|
|
| |
Tuner System | Channel | VHF | UHF | CATV | |||||
|
|
|
| Coverage |
|
|
|
| |
|
|
|
|
| |||||
| CCIR | ||||||||
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
TV System
Refer to the control reference on page 38.
Change this setting if you connect an NTSC television or to record NTSC video from another source.
1 While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and press [ENTER].
3 Press [e,r] to select “Setup” and press [ENTER].
4 Press [e,r] to select “Connection” and press [q].
5 Press [e,r] to select “TV System” and press [ENTER].
6 Press [e,r] to select the TV system and press [ENTER].
Setup |
|
| TV System | |
|
|
|
|
|
|
|
| PAL |
|
|
|
|
|
|
Tuning |
|
| NTSC |
|
Disc |
|
|
|
|
|
|
|
|
|
Picture |
|
|
|
|
•PAL (factory preset)
–Select when connecting to a PAL or
–Select to record television programmes and PAL input from other equipment.
•NTSC
–Select when connecting to an NTSC television. Television programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
The confirmation screen appears.
7 Press [w,q] to select “Yes” and press [ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
nTo change the setting all at once (PAL ↔ NTSC)
While stopped, press and hold [g] and [; OPEN/CLOSE] on the main unit at the same time for about 5 seconds.
Resetting channel setting/TV System
RQT8317
43