Panasonic TH-103PF10UK manual Sync, FREQ. kHz / V-FREQ. Hz, Setting RGB sync signal

Page 43

SET UP for Input Signals

SYNC

Select SIGNAL from the “SET UP” menu during RGB input signal.

1	Press to adjust.

SET UP	1/2
SIGNAL
COMPONENT/RGB-IN SELECT
	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

Press ACTION () button

2		Press to exit from adjust mode.

	SIGNAL	[ RGB ]

	SYNC	AUTO

	3 : 2 PULLDOWN	OFF

	VIDEO NR	OFF

Setting RGB sync signal

Conﬁrm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal).

AUTO:	The H and V sync or synchronized signal are automatically selected.
	If both input, it is selected the H and V sync.
ON G:	Uses a synchronized signal on the Video G signal, which is input from
	the G connector.
VBS:	Uses a synchronized signal of Composite Sync input, which is input
	from the HD connector.

SYNCAUTO

SYNC

ON G

SYNCVBS

H-FREQ. (kHz) / V-FREQ. (Hz)

Displays the H (Horizontal) / V (Vertical) frequencies.

This display is valid only for RGB/PC and Digital input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-FREQ. 33.8 kHz

V-FREQ. 60.0 Hz

43

Image 43

Contents English High Deﬁnition Plasma DisplayOperating Instructions Model No. TH-103PF10UKRisk of Electric Shock Do not Open Important Safety Instructions Table of Contents Canadian Notice FCC CautionTrademark Credits When using the Plasma Display Safety PrecautionsAC Power Supply Cord MaintenanceSafety Precautions / Maintenance SetupAccessories Supplied AccessoriesRemote Control Batteries Open ConnectionsAudio OUT Terminals connection ClosePC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorConnections Basic format for control data CommandSerial Terminals connection Communication parametersDTV-STB Hdmi connectionComponent / RGB connection DVDRight side surface Power on / OFFConnecting the AC cord plug to the Plasma Display Connecting the plug to the Wall OutletBasic Controls Basic Controls Advanced Picture SetupSettings On-Screen Menu DisplaysOn-Screen Menu Displays Power on Time Power OFF TimeComponent INPUT1 INPUT2A INPUT2B INPUT3 PC Selecting the input signalInitial selections Selecting the On-Screen Menu LanguageNormal Full During Multi PIP OperationsPicture Explanation During COMPONENT, RGB and PC input signal Adjusting POS. /SIZESize / DOT Clock / Clock Phase / 11 Pixel Mode Press to adjust POS. /SIZEAdjusting POS. /SIZE Multi PIP Longer than 5 seconds. Press to change input signalPress to conﬁrm Off Sets normal two screen display modeOn Sets Advanced PIP mode Advanced PIPCinema Picture AdjustmentsStandard DynamicPicture Adjustments Advanced SettingsTreble Sound AdjustmentBass MIDMute Sound AdjustmentSDI Sound Output SurroundSelect the magniﬁcation required for the enlarged display Digital ZoomDisplay the operation guide Select the area of the image to be enlargedButton Forward Present Time SetupPresent Time Setup Press to set up DAY or Present Time of DAYDisplay the SET UP Timer Screen Press to select SET UP TimerPower on Time / Power OFF Time Negative / Scroll selection Mode selectionStart setting Screensaver For preventing image retentionReduces screen image retention Setup of Screensaver TimeScreensaver For preventing image retention OFF Dark MID Bright Side BAR AdjustPress to exit from Screensaver Customizing the Input labels Reduces power consumptionAddition sign Selected Input Portrait Setup will be unavailable SET UP for Multi DisplayHow to setup Multi Display If you set Multi Display Setup to onPress to select Seam Hides Video Press to select OFF, on SET UP for Multi DisplayDisplay Number locations for each arrangement Examples AI-Control ID Remote Control FunctionID remote control button operation ID CancellationHow to setup Portrait SET UP for PortraitPress to select Seam Hides Video Undisplayed area 48 dots Set a mode of image division for Portrait functionLocation Viewing Area LocationComponent RGB SET UP for Input SignalsComponent / RGB in Select 3D Y/C Filter For Ntsc AV imagesRefresh Rate SET UP for Input SignalsPress Action button Press to exit from adjust mode Video NR / Block NR / Mosquito NRPulldown Color System / Panasonic AutoColor System Displays the H Horizontal / V Vertical frequencies Setting RGB sync signalSync FREQ. kHz / V-FREQ. HzOptions Adjustments Options Adjustments Sets the color temperature for TV studio When Disable is set, the Off-timer is cancelledEnable ID remote control functions Off Nullify all the settings adjusted Studio W/BRotates the image 180 degrees This functions when display is turned onNormalization Rotate Off Does not rotate the imageWeekly Command Timer Press to set each item Press to select a command numberPress to select Time / Command Time Set the time to execute a command programShipping condition Plasma Display panel TroubleshootingSymptoms Checks Symptoms CheckCOMPONENT/RGB/PC/VIDEO input signals VGA60 COMPONENT/RGB/PC/VIDEO input signalsVideo input Hdmi MHz Active pixels Pixels Active lines LinesCommand list of Weekly Command Timer Speciﬁcations Limits and Exclusions Panasonic Canada Inc Limited Warranty StatementMemo Memo Panasonic Canada Inc Customer’s RecordPanasonic Professional Display Company Executive Ofﬁce