Panasonic TH-103PF10UK manual Options Adjustments

Page 44

Options Adjustments

1

2

3

4

5

6

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed.

Press to select your preferred menu.

Press to adjust the menu.

Press to exit from Options menu.

Options1/3

Weekly Command Timer

Onscreen display		On

Initial INPUT		Off

Initial VOL level	Off	0

Maximum VOL level	Off	0

INPUT lock		Off

Button lock		Off

Remocon User level		Off

Advanced PIP		Off

Item		Effect							Adjustments
Weekly
Command					Sets Weekly Command Timer. (see page 48)
Command					Sets Weekly Command Timer. (see page 48)
Timer
					On:	Displays all the following on screen.
					• Power on display
Onscreen					• Input signal switch display
display	On		Off		• No signal display
					• Mute and the remaining time of off-timer after was pressed.
					Off:	Hides all the items above from view.

					Off	PC	INPUT1	INPUT2	INPUT3
					Adjusts the input signal when the unit is turned on.
					Notes:
Initial INPUT					• Only the adjusted signal is displayed. (see page 18)
Initial INPUT					• Signal can be displayed when the Terminal board is installed.

					• This menu is available only when “INPUT lock” is “Off”.
					• When a dual input terminal board is attached, A or B is displayed depending on the selected input
					signal. (Ex. INPUT1A, INPUT1B)

44

Image 44

Contents High Deﬁnition Plasma Display Operating InstructionsModel No. TH-103PF10UK EnglishRisk of Electric Shock Do not Open Important Safety Instructions Table of Contents Trademark Credits FCC CautionCanadian Notice Safety Precautions When using the Plasma DisplayMaintenance Safety Precautions / MaintenanceSetup AC Power Supply CordRemote Control Batteries AccessoriesAccessories Supplied Connections Audio OUT Terminals connectionClose OpenConnections Signal Names for Mini D-sub 15P ConnectorPC Input Terminals connection Command Serial Terminals connectionCommunication parameters Basic format for control dataHdmi connection Component / RGB connectionDVD DTV-STBPower on / OFF Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet Right side surfaceBasic Controls Basic Controls Picture Setup SettingsOn-Screen Menu Displays AdvancedComponent Power on Time Power OFF TimeOn-Screen Menu Displays Selecting the input signal Initial selectionsSelecting the On-Screen Menu Language INPUT1 INPUT2A INPUT2B INPUT3 PCPicture Explanation During Multi PIP OperationsNormal Full Adjusting POS. /SIZE Size / DOT Clock / Clock Phase / 11 Pixel ModePress to adjust POS. /SIZE During COMPONENT, RGB and PC input signalAdjusting POS. /SIZE Longer than 5 seconds. Press to change input signal Multi PIPOff Sets normal two screen display mode On Sets Advanced PIP modeAdvanced PIP Press to conﬁrmPicture Adjustments StandardDynamic CinemaAdvanced Settings Picture AdjustmentsSound Adjustment BassMID TrebleSound Adjustment SDI Sound OutputSurround MuteDigital Zoom Display the operation guideSelect the area of the image to be enlarged Select the magniﬁcation required for the enlarged displayPresent Time Setup Present Time SetupPress to set up DAY or Present Time of DAY Button ForwardPower on Time / Power OFF Time SET UP TimerDisplay the SET UP Timer Screen Press to select Mode selection Start settingScreensaver For preventing image retention Negative / Scroll selectionScreensaver For preventing image retention Setup of Screensaver TimeReduces screen image retention Press to exit from Screensaver Side BAR AdjustOFF Dark MID Bright Addition sign Selected Input Reduces power consumptionCustomizing the Input labels SET UP for Multi Display How to setup Multi DisplayIf you set Multi Display Setup to on Portrait Setup will be unavailableDisplay Number locations for each arrangement Examples SET UP for Multi DisplayPress to select Seam Hides Video Press to select OFF, on ID Remote Control Function ID remote control button operationID Cancellation AI-ControlPress to select Seam Hides Video SET UP for PortraitHow to setup Portrait Set a mode of image division for Portrait function LocationViewing Area Location Undisplayed area 48 dotsSET UP for Input Signals Component / RGB in Select3D Y/C Filter For Ntsc AV images Component RGBSET UP for Input Signals Press Action button Press to exit from adjust modeVideo NR / Block NR / Mosquito NR Refresh RateColor System Color System / Panasonic AutoPulldown Setting RGB sync signal SyncFREQ. kHz / V-FREQ. Hz Displays the H Horizontal / V Vertical frequenciesOptions Adjustments Options Adjustments When Disable is set, the Off-timer is cancelled Enable ID remote control functionsOff Nullify all the settings adjusted Studio W/B Sets the color temperature for TV studioThis functions when display is turned on NormalizationRotate Off Does not rotate the image Rotates the image 180 degreesWeekly Command Timer Press to select a command number Press to select Time / CommandTime Set the time to execute a command program Press to set each itemShipping condition Troubleshooting Symptoms ChecksSymptoms Check Plasma Display panelCOMPONENT/RGB/PC/VIDEO input signals COMPONENT/RGB/PC/VIDEO input signals Video input HdmiMHz Active pixels Pixels Active lines Lines VGA60Command list of Weekly Command Timer Speciﬁcations Limits and Exclusions Limited Warranty Statement Panasonic Canada IncMemo Memo Customer’s Record Panasonic Professional Display CompanyExecutive Ofﬁce Panasonic Canada Inc