How to open the front cover
SD CARDT
Push “”.
Terminal cover open and close
Open
1. Push down hooks and pull the
Close
1. Insert the claws (at 4 points) |
21
cover slightly towards yourself to disengage the claws (at 4 points).
2
1
at the bottom end. |
2. Push until it clicks. |
2. Slowly pull out in the downward direction.
1
When connecting to the rear AV Input / Output terminals, connect through this window. (This window cannot close completely when connecting the cables.)
Other cables should be connected before closing the terminal cover.
Fastening method
Clamper |
Open |
Close |
Fastening of Power Cable and other cables
1 | 1 | 2 |
|
|
Fastening method of other cables
Attach the clamper on the installation hole, and fasten them. Bundle the cable with the cable fastening clamper.
Fastening band
2
Fastening method of Power Cable
1.Insert the power plug into the main body.
2.Fasten with the Power Cable fastening band.
Fastening
To tighten.
Loosening
2 Pull off.
Keep the knob pressed.
1
7