
3.4 Changing Scan Settings
<When deleting a custom document size>
1)In the "Add or Remove Custom sizes" window, select the document size you want to delete and click the [Remove] button.
⇒The confirmation message appears.
2)Click the [Yes] button.
⇒In the "Add or Remove Custom sizes" window, confirm that the selected docu- ment size is deleted.
3)Click the [Close] button to close the "Add or Remove Custom sizes" window.
<When changing the settings>
1)In the "Add or Remove Custom sizes" window, select the document size you want to change and click the [Change] button.
⇒The [Additional custom size settings] window appears.
2)Change the settings.
3)To complete the setting, click the [OK] button.
⇒The "Add or Remove Custom sizes" window returns and the changes are saved.
4)Click the [Close] button to close the "Add or Remove Custom sizes" window.
When you select Business card (90 mm x 55, 55 mm x 90 mm) and perform
ATTENTION
scanning, the result is the following:
From the scanned length, the horizontal or vertical position is automatically rec- ognized and output.
The length (loading direction) is the actual scanned length of the card. The width is fixed to 90 mm (horizontal position), or 55 mm (vertical position).
■"Scan mixed paper size"
By marking the checkbox, you can scan the documents of different widths or sizes at a time.
■[Carrier Sheet Settings] button
You can set or change settings to scan with the Carrier Sheet on the following window.
3
Basic Scanner Operations
ScanSnap S510M Operator's Guide
53