Fujitsu S510M manual Basic Scanner Operations, Press the SCAN button, white paper

3.5 Various settings according to your needs

7.Press the [SCAN] button .

⇒Scanning is started and the image data is generated in the specified size.

ATTENTION	• The image is centered and output in the specified size.
	When "Automatic detection" is selected in the "Output image size" drop-
	down list of the "Carrier Sheet Settings" window, an optimal size is selected
	automatically from the available standard sizes (refer to page 55) and the
	image is output.

•In the "Carrier Sheet Settings" window, when "Automatic detection" is selected in the "Output image size" drop-down list, the size of the produced image may be smaller than the original.

Example: When you scan the A5 size image printed at the center of an A4 size paper

D A5 size image is output.

To output an image in the original size, specify the document size in the [Output image size] drop-down list

If the following symptoms are observed, lay the material over a piece of white

HINT	paper to scan.
	• The output image is not in a suitable size (when [Automatic detection] is
	selected).

•The outline of the material is shaded.

•Black lines appear around the material cut out in an indefinite shape.

white paper

3

Basic Scanner Operations

ScanSnap S510M Operator's Guide

91