Fujitsu S510M manual Basic Scanner Operations, ⇒ This starts the scanning

3.1 Flow of Operations

• If [Use Quick Menu] is checked, you can select the application after scanning

HINT	the documents. This may be convenient if you want to specify the application
	after scanning.

•If [Use Quick Menu] is not checked, you can process the scanned document with the application specified in "Scan and Save Settings" window. So, you need to be aware what application has specified in "Scan and Save Settings" window in advance.

3.Load the document onto the scanner.

Refer to "3.2 Scanning Different Document Types" (page 30) and "3.3 Loading Documents" (page 33).

4.Press ([SCAN] button).

⇒This starts the scanning.

• By default, documents are scanned in "Duplex scan" mode when you press

HINT		the [SCAN] button. With "ScanSnap Manager," you can change the mode to
		"Simplex scan" mode.
	• You can also start the scanning by using the ScanSnap Manager icon
		in the Dock menu to select "Simplex" or "Duplex" scan.
		Refer to "3.4 Changing Scan Settings" (page 36) for more details.
ATTENTION	• Do not connect or disconnect other USB devices to or from the computer dur-

ing scanning.

•Do not close the paper chute or press the [POWER] button on the scanner during scanning.

⇒The Power lamp on the scanner blinks blue during scanning. The following window appears to indicate the scanning status.

5.After the scanning a window may appear to set the application operation.

⇒When [Use Quick Menu] is checked in Step 2, following [Quick Menu] appears.

3

Basic Scanner Operations

ScanSnap S510M Operator's Guide

25