Fujitsu S510M manual Replacing Consumables

7.3 Replacing the Pick Roller

6. Remove the Pick roller with its shaft.

Slightly pull up the left part of the Pick roller shaft (about 5mm), move it towards the left side, and then raise it to remove from the scanner.

Pick roller shaft

Pick roller

If the area around the Pick roller is contaminated by paper debris, it may cause

ATTENTION

scanning errors. Remove the dirt using a dry cloth moistened with Cleaner F1.

*Do not use water, neutral detergent or aerosol spray.

7.Remove the Pick roller from its shaft.

Pull out the shaft from the Pick roller while lifting up its tab.

Tab

Pick roller shaft

Pick roller

7

Replacing Consumables

ScanSnap S510M Operator's Guide

141