Panasonic TH-5065PF10UK PC Input Terminals connection, Signal Names for Mini D-sub 15P Connector

Page 11

Connections

PC Input Terminals connection

COMPUTER

Conversion adapter (if necessary)

AUDIO

PC IN

Mini D-sub 15p

RGB

PC cable

Audio

Stereo plug

Connect a cable which matches

the audio output terminal on the computer.

Notes:

•Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal.

•Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

•The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “NORMAL”, and 1,920 × 1,080 dots when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible to show ﬁne detail with sufﬁcient clarity.

•The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

•Some PC models cannot be connected to the set.

•There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

•The computer shown in the illustration is for example purposes only.

•Additional equipment and cables shown are not supplied with this set.

•Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speciﬁed frequency range.

•Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector.

•Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” menu to “COMPONENT” (when COMPONENT signal connection) or “RGB” (when RGB signal connection). (see page 42)

Signal Names for Mini D-sub 15P Connector

5 4 3 2 1

10		9		8	7	6
15	14		13	12		11

Pin Layout for PC Input Terminal

Pin No.	Signal Name	Pin No.	Signal Name	Pin No.	Signal Name
1	R (PR/CR)	6	GND (Ground)	11	NC (not connected)
2	G (Y)	7	GND (Ground)	12	SDA
3	B (PB/CB)	8	GND (Ground)	13	HD/SYNC
4	NC (not connected)	9	+5 V DC	14	VD
5	GND (Ground)	10	GND (Ground)	15	SCL

11

Image 11

Contents Please keep this manual for future reference Operating Instructions Manual de instruccionesEnglish Model No. Número de modeloRisk of Electric Shock Do not Open Important Safety Instructions Table of Contents Trademark Credits FCC CautionCanadian Notice When using the Plasma Display Safety PrecautionsAC Power Supply Cord MaintenanceSafety Precautions / Maintenance Setup Remote Control Batteries Accessories Accessories Supplied See ConnectionsAC cord ﬁxing Monitor terminalCovered HDMITerminal Board BNC Component Video ConnectionsOptional Terminal Board Insert Slot Equivalent of DualPC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorBasic format for control data CommandSerial Terminals connection Communication parametersDVD Hdmi connectionComponent / RGB connection RCA-BNCConnecting the plug to the Wall Outlet Power on / OFFConnecting the AC cord plug to the Plasma Display Power on / OFF Menu Screen on / OFF Remote control sensor Volume AdjustmentMain Power On / Off Switch Power Indicator Basic ControlsBasic Controls Menu button on the unit can also be To Picture adjust menu Pressed Press to select SeeTo Sound adjust menu On-Screen Menu DisplaysComponent Power on Time Power OFF TimeOn-Screen Menu Displays INPUT1 INPUT2A INPUT2B INPUT3 PC Selecting the input signalInitial selections Selecting the On-Screen Menu LanguageNormal Full During Multi PIP OperationsDuring COMPONENT, RGB and PC input signal Adjusting POS. /SIZESize / DOT Clock / Clock Phase / 11 Pixel Mode Press to adjust POS. /SIZEAdjusting POS. /SIZE Multi PIP Press to conﬁrm Off Sets normal two screen display modeOn Sets Advanced PIP mode Advanced PIPCinema Picture AdjustmentsStandard DynamicPicture Adjustments Advanced SettingsTreble Sound AdjustmentBass MIDMute Sound AdjustmentSDI Sound Output SurroundDigital Zoom Button Forward Present Time SetupPress to set up DAY or Present Time of DAY Power on Time / Power OFF Time SET UP TimerDisplay the SET UP Timer Screen Press to select Negative / Scroll selection Mode selectionStart setting Screensaver For preventing image retentionScreensaver For preventing image retention Setup of Screensaver TimeReduces screen image retention Press to exit from Screensaver Side BAR AdjustOFF Dark MID Bright Addition sign Selected Input Reduces power consumptionCustomizing the Input labels Portrait Setup will be unavailable SET UP for Multi DisplayHow to setup Multi Display If you set Multi Display Setup to onDisplay Number locations for each arrangement Examples SET UP for Multi DisplayPress to select Seam Hides Video Press to select OFF, on Press to select OFF , on ID Remote Control FunctionID remote control button operation ID CancellationPress to select Seam Hides Video SET UP for PortraitHow to setup Portrait Viewing Area Location Location setting When Portrait Setup onDisplay the image of the selected Location Viewing Area and LocationComponent RGB SET UP for Input SignalsComponent / RGB in Select 3D Y/C Filter For Ntsc AV imagesRefresh Rate SET UP for Input SignalsPress Action button Press to exit from adjust mode Video NR / Block NR / Mosquito NRColor System Color System / Panasonic AutoPulldown Displays the H Horizontal / V Vertical frequencies Setting RGB sync signalSync FREQ. kHz / V-FREQ. HzOptions1/3 Options AdjustmentsOff Initial VOL Sets normal volume Level Options AdjustmentsWhen Disable is set, the Off-timer is cancelled Normalization Weekly Command Timer Press to set each item Press to select a command numberPress to select Time / Command Time Set the time to execute a command programShipping condition Plasma Display panel TroubleshootingCOMPONENT/RGB/PC/VIDEO input signals VGA60 COMPONENT/RGB/PC/VIDEO input signalsVideo input Hdmi MHz Active pixels Pixels Active lines LinesCommand list of Weekly Command Timer TH-50PF10UK TH-65PF10UK SpeciﬁcationsLimits and Exclusions Limited Warranty Statement Panasonic Canada Inc Customer’s RecordPanasonic Professional Display Company Executive Ofﬁce