Panasonic TH-42PF20U, TH-50PF20U operating instructions Specifications, Power Consumption

Specifications

				TH-42PF20U	TH-50PF20U
Power Source				110 - 127 V	AC, 50/60 Hz
Power Consumption
	Rated Power Consumption			400 W	475 W
	On mode Average Power			165 W	220 W
	Consumption∗
	Stand-by condition			Save OFF 0.9 W, Save ON 0.4 W	Save OFF 0.9 W, Save ON 0.4 W
	Power off condition			0.2 W	0.2 W
Plasma Display panel				Drive method : AC type 42-inch,	Drive method : AC type 50-inch,
				16:9 aspect ratio	16:9 aspect ratio
Screen size				36.2” (921 mm) (W) × 20.4” (518 mm) (H)	43.5” (1,105 mm) (W) × 24.4” (622 mm) (H)
				× 41.6” (1,057 mm) (diagonal)	× 49.9” (1,268 mm) (diagonal)
	(No.of pixels)			2,073,600 (1,920	(W) × 1,080 (H))
				[5,760 × 1,080 dots]
Operating condition
	Temperature			32 °F - 104 °F (0 °C - 40 °C)
	Humidity			20 % - 80 %
Applicable signals
	Color System			NTSC, PAL, PAL60, SECAM, Modified NTSC
	Scanning format			525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p
				· 24p · 25p · 30p · 24sF, 1250 (1080) / 50i
	PC signals			VGA, SVGA, XGA, SXGA
				UXGA ···· (compressed)
				Horizontal scanning frequency 15 - 110 kHz
				Vertical scanning frequency 48 - 120 Hz
Connection terminals
		LAN		RJ45 10BASE-T/100BASE-TX, compatible with PJLink™
	AV IN		VIDEO	BNC	1.0 Vp-p (75 Ω)
			AUDIO L-R	RCA Pin jack × 2	0.5 Vrms
			HDMI	TYPE A Connector
	COMPONENT/RGB IN
			Y/G	BNC	with sync 1.0 Vp-p (75 Ω)
			PB/CB/B	BNC	0.7 Vp-p (75 Ω)
			PR/CR/R	BNC	0.7 Vp-p (75 Ω)
			AUDIO L-R	RCA Pin jack × 2	0.5 Vrms
	DVI-D IN			DVI-D 24 Pin	Compliance with DVI Revision 1.0
				Content Protection	Compatible with HDCP 1.1
			AUDIO	Stereo mini jack (M3) × 1	0.5 Vrms
	PC IN			High-Density Mini D-sub 15 Pin	Y or G with sync 1.0 Vp-p (75 Ω)
					Y or G without sync 0.7 Vp-p (75 Ω)
					PB/CB/B: 0.7 Vp-p (75 Ω)
					PR/CR/R: 0.7 Vp-p (75 Ω)
					HD/VD: 1.0 - 5.0 Vp-p (high impedance)
			AUDIO	Stereo mini jack (M3) × 1	0.5 Vrms
	SERIAL			External Control Terminal
				D-sub 9 Pin	RS-232C compatible
	EXT SP			Speaker Terminal	6 Ω, 16 W [8 W + 8 W] (10 % THD)
Dimensions (W × H × D)				40.2” (1,020 mm) × 24.1” (610 mm) × 3.5” (89 mm)	47.7” (1,210 mm) × 28.5” (724 mm) × 3.5” (89 mm)
Mass (weight)
	main unit only			approx. 53.0 lbs	approx. 68.4 lbs
	with speakers			approx. 61.8 lbs	approx. 79.4 lbs

∗Based on IEC 62087 Ed.2 section 11.6.1 measurement method.

Note:

Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.

21