Accessories
Accessories Supplied
Check that you have the Accessories and items shown 
Operating Instruction book
Remote Control Transmitter N2QAYB000432
Batteries for the Remote Control Transmitter (AA Size × 2)
Fixing band × 1 |
| AC cord |
|
|
|
Remote Control Batteries
Requires two AA batteries.
1.Pull and hold the hook, then open the battery cover.
2. Insert batteries - note correct | 3. Replace the cover. |
polarity ( + and |
|
“AA” size |
|
- |
-+
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an
Observe the following precautions:
1.Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2.Do not combine a used battery with a new one.
3.Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4.Do not attempt to charge,
5.Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.
6.Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
7