Connections
Before connection to the projector
Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off.
One RGB cable is provided with the projector. If necessary, prepare commercial connecting cables that match with the projector and each peripheral device terminals.
If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective.
Confirm the type of video signals. See “List of compatible signals” on page 49.
When you connect more than one AV equipment, switch the audio connection manually.
Connecting example: AV equipment
Connecting with VIDEO IN/S-VIDEO IN
To | DVD player |
OR
To video output or | Video player |
| |
audio output |
|
Audio system |
|
Connecting example: Computers
Getting Started
Computers
RGB signal cable (Commercial)
Monitor
Audio system
Serial cable
NOTE:
•When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT, do not connect any input signals.
•Outputting signals from the COMPUTER 1 OUT terminal to multi connected device(s) may result in signal deterioration.
•See