Panasonic PT-LW80NTE manual Projecting an image, Selecting the input signal, Positioning the image

Page 24

Projecting an image

Selecting the input signal

1. Switch on the connected devices.

Press the play button of the required device.

2.Detect the input signal automatically.

3.Switch the aspect ratio automatically.

NOTE:

•If the SIGNAL SEARCH in OPTION menu is deactivated, select the required input method by pressing the INPUT SELECT buttons of the remote control or the INPUT SELECT button of the projector several times. See “SIGNAL SEARCH” on page 38, “Switching the input signal” on page 26 or “INPUT SELECT button” on page 14.

•See “ASPECT” on page 35.

Basic Operation

Positioning the image

1.Place the projector at the right angle from the screen.

Screen

2. Adjust the vertical angle of the projector.

Press the front leg adjuster buttons and adjust the vertical angle.

See “Front leg adjusters and throwing angle” on page 18.

3. Open the Zoom-Focus ring cover.

See “Zoom-Focus ring cover” on page 14.

4.Turn the zoom and focus rings to adjust the projected image.

You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See “TEST PATTERN” on page 39.

Focus ring

Zoom ring

5. Close the Zoom-Focus ring cover.

See “Zoom-Focus ring cover” on page 14.

NOTE:

•Do not touch the air exhaust port as this may cause burns or injury.

•If keystone distortion occurs, see “KEYSTONE” on page 34.

•When you adjust the zoom after adjusting the focus, you may need to adjust the focus of the image again.

ENGLISH - 24

Image 24

Contents Operating Instructions Important Safety Notice This Apparatus Must be EarthedTo rain or moisture Important Safety Notice For business users in the European UnionImportant Safety Information Declaration of ConformityImportant Infomation Contents Settings MaintenanceContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Lamp cover gets very hot, and touching it can cause burnsRemove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesSecurity Order to get the best picture qualityOptical components Liquid crystal panelAccessories K1HA15DA0002Minimum required setting screen Read this firstAbout Your Projector Projector bodyTop and front view Control panelRemote control signal receptor Lamp unit compartment About Your Projector Back and bottom viewRemote control Battery compartment Top viewAbout Your Projector Attaching a hand strapSetting up Screen size and throw distanceCalculation methods Front leg adjusters and throwing angle Setting upProjection method Mounting in the ceiling and projecting from frontConnecting example AV equipment Connecting example ComputersConnecting with Video IN/S-VIDEO ConnectionsSwitching the projector on/off ConnectingDirect power off function Direct power on functionSwitching on the projector Switching the projector on/offBy control panel operation By remote control operation By direct power on functionSwitching off the projector By remote control operationBy direct power off function By control panel operationPower and Power Lock indicators Power Lock indicator statusPower indicator status Selecting the input signal Projecting an imagePositioning the image Remote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Resetting to the factory default settingsRemote control operation Capturing an imageProjecting an image in INDEX-WINDOW mode Using an assigned functionControlling the volume of the speaker Enlarging the centred area Enlarging the imageShifting the centre point Press any side of the Digital Zoom +/- button onceMenu Navigation Navigating through the MenuStill Mode Main menu and Sub-menuMenu Navigation TV-SYSTEMSxga Mode OSD DesignBlackboard Back ColorPicture menu Detailed Setup For S-VIDEO/VIDEO signalsFor RGB signals Position menu Image will be projected without any size adjustment AspectAspect ratio options 169Position menu Aspect ratio depend on signals Over ScanFrame Lock Screen Format menu OptionOption menu Lamp Power Power OFF TimerDirect Power on Auto SetupScreen Format Function ButtonTest Pattern Audio Balance Input Password Password ChangeSecurity menu Text DisplayText Change Security menuText Display Wireless menu Items in Wireless menuWireless menu, the following items are available Lamp and Temp Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorCare and Replacement When to replace the Lamp unitReplacing the Lamp unit Before replacing the lamp unitCare and Replacement Replacement procedure Resetting the Lamp RuntimeRemoving and replacing the lamp unit Troubleshooting List of compatible signals Technical InformationQuality*2 Dots*1 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorSpecifications Video AudioComputer Audio Variable AudioScreen size and throw distance for 169/43 aspect ratio 169Calculation methods for Projection size 16 Throw distance LDimensions Trademark acknowledgementsUnit mm Index Position Power IndexS0508-1068B