Panasonic PT-LB51SU manual Enlarging the centered area, Controlling the volume of the speaker

Page 26

Remote control operation

Enlarging the centered area

You can enlarge the projected image down to a centered area for emphasizing within the range of 1x to 2x.

Enlarging the image

1. Press DIGITAL ZOOM +/- button once.

The centered area of the image will then be enlarged to 1.5x.

2.Adjust the image size by pressing DIGITAL ZOOM +/- button.

The image size will be changed in steps of 0.1.

Shifting the center point

Press F G I H to shift the center point.

Basic Operation

NOTE:

•When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 33.

•When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be canceled.

Controlling the volume of the speaker

You can control the volume of the built-in
speakers and output sound. Press +/- to	NOTE:
control the volume.	•	Power consumption can be reduced if the volume level
		is lowered.
	•	This operation can also be carried out using the
		VOLUME command in the MAIN MENU.
		See “VOLUME” on page 36.

ENGLISH - 26

Image 26

Contents PT-LB51U PT-LB51SU Important Safety Notice Model number PT-LB51NTU / PT-LB51U / PT-LB51SUModel Number PT-LB51NTU / PT-LB51U / PT-LB51SU Trade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Appendix SettingsMaintenance Precautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoor Use only the specified batteriesDo not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Accessories Battery compartment Remote controlControl to adjust the volume of the speakers. About Your ProjectorAbout Your Projector Attaching a hand strapControl panel Projector bodyTop and front view Connector Panel Back and bottom viewProjected image Screen Setting upScreen size and throw distance Projection size 4 Throw distance L Height ScreenSetting up Calculation methods for screen dimensions Mounting in the ceiling and projecting from front Setting upProjection method Mounting in the ceiling and projecting from rearFront adjustable legs and throwing angle Before connection to the projector Connecting with computersConnections Connecting with Component Connecting with AV equipmentConnecting with Video IN/S-VIDEO ConnectionsPower indicator Switching the projector on/offPower cord Switching the projector on/off Switching on the projectorSwitching off the projector Plug the Power cord into the projectorPositioning the image Selecting the input signalProjecting an image Operating range Remote control operationSetting up the image position automatically Facing to the projectorStopping the projection temporary Switching the input signalCapturing an image Switching the position Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Changing the image sizeEnlarging the image Controlling the volume of the speakerEnlarging the centered area Shifting the center pointMenu Navigation Navigating through the MenuMain menu and Sub-menu Menu NavigationOnly Live Mode CUT Status InitializeSee CD-ROM contents for detailed information Picture menu For S-VIDEO/VIDEO signals Detailed SetupFor RGB signals Daylight ViewPosition menu Resizing S1 video signalsLanguage menu Frame LockOption menu Signal Search Power OFF TimerAuto Setup Direct Power onSemi transparent black You can perform more detailed setting in various itemsHighland Solid blueSecurity menu Password ChangeInput Password Text DisplayItems in Wireless menu Wireless menu, the following items are availableLamp indicator TEMP, Lamp IndicatorsManaging the indicated problems Temp indicatorReplacing the air filter Care and ReplacementCleaning the projector Replacing the Lamp unit Care and ReplacementWhen to replace the Lamp unit Before replacing the Lamp unitLamp unit cover Lamp unit cover fixing screws Handles lamp unit fixing screwsTroubleshooting List of compatible signals Technical InformationSerial terminal Projector Technical Information Cable specificationsControl commands Panasonic Manufacturer Key commandComputer connection guidance AppleSpecifications Computer Audio OUTAudio Variable AudioDimensions Trademark acknowledgments Index Navigation buttonsRing Remote controlIndex Screen sizeNuméro de série Avis important concernant la sécuritéNuméro de modèlePT-LB51NTU / PT-LB51U / PT-LB51SU Advertencia Avis important concernant la sécuritéAvertissement Déclaration de conformitéPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéNe pas mélanger des piles usées et des piles neuves Précautions lors du transportUtiliser uniquement les piles spécifiées Sinon cela peut causer des chocs électriquesAffichage à cristaux liquides Précautions lors de linstallationPrécautions lors de lutilisation ÉcranAvant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Remplacement de lunité de la lampe Procédure de remplacement Poignées Vis de fixation du bloc de lampe