Panasonic PT-50LCZ70 operating instructions RGB signals that can be input

Installation (continued)

RGB signals that can be input

The table below lists the different types of RGB signals that can be input.

If a signal which differs greatly from the types listed below is input, the picture may not be displayed correctly, or a black background may be displayed.

				Signal data
	Mode type
		No. of dots		Horizontal frequency	Vertical frequency
		(H × V)		(kHz)	(Hz)
	VGA400 (70 Hz)	640	× 400	31.47	70.08
	VGA480 (60 Hz)	640	× 480	31.47	59.94
	Macintosh 13˝ *	640	× 480	35.00	66.67
	VGA480 (75 Hz)	640	× 480	37.50	75.00
	SVGA (60 Hz)	800	× 600	37.88	60.32
Signals
	SVGA (75 Hz)	800	× 600	46.88	75.00
Computer	SVGA (85 Hz)	800	× 600	53.67	85.06
	Macintosh 16˝ *	832	× 624	49.73	74.55
	WVGA (60 Hz)	852	× 480	31.47	59.94
Personal
	XGA (60 Hz)	1 024 × 768		48.36	60.00
	XGA (70 Hz)	1 024 × 768		56.48	70.07
	XGA (75 Hz)	1 024 × 768		60.02	75.03
	XGA (85 Hz)	1 024 × 768		68.67	85.00
	Macintosh 21˝ *	1 152 × 870		68.68	75.06
	SXGA (60 Hz)	1 280	× 1 024	63.98	60.02
	WXGA (60 Hz)	1 366 × 768		48.39	60.04

Notes

• The D-SUB 15P connector can accept RGB (H-V sync separate).

• The signal with a * mark is compatible with sync on Green.

• To view a WXGA and WVGA picture, a setting change is necessary. Please refer to “PC Adjust” on page 37.

20