PC Adjust, Other Adjust | Panasonic PT-50LCZ70 specification

Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may not be available.

PC Adjust

You can adjust the picture when “Input select” is selected to “PC”. (p. 29)

Procedure

1.Press ▲▼ to select “PC adjust”.

2.Press OK to display the PC adjust menu.

4.Press ◄► to adjust each item.

Item	Explanations
Normal	Resets all picture adjustments to factory default
Normal	settings.
	settings.
	• H&V : The H and V sync signals are input from
Sync	the HD/VD connector.
Sync	• On G : Uses a synchronized signal on the Video
	• On G : Uses a synchronized signal on the Video
	G signal, which is input from the G connector.
Dot clock	Adjusts horizontal size.
H-Position	Adjusts horizontal position.
V-Position	Adjusts vertical position
	Adjusts in order to remove any picture
Clock phase	interference or contour blurring which may occur
	in computer images.
Input	Switches to wide display.
Input	Input signal switched from XGA to WXGA and
resolution	Input signal switched from XGA to WXGA and
resolution	from VGA to WVGA.
	from VGA to WVGA.
	Displays the frequencies of the PC signal
H-Frequency/	currently being adjusted.
H-Frequency/	Displays the H (Horizontal) / V (Vertical)
V-Frequency	frequencies.
	Display range: Horizontal	15-110 kHz
	Vertical	48 - 120 Hz

Note

•This function is available only when the signal being viewed is from a PC.

Other detailed picture adjustments can be made. This function is not available when “Input select” is selected to “PC”. (p. 29)

Procedure

1.Press ▲▼ to select “Other adjust”.

2.Press OK to display the Other adjust menu.

4.Press ◄► to adjust each item.

	Item	Explanations
	Video NR	Reduces noise, commonly called snow. Leave off
	Video NR	when receiving a strong signal.
		when receiving a strong signal.
	3D Y/C filter	Minimizes noise and cross-color in the picture.
		Select SD or HD.
		• SD : Color matrix is set same as a normal TV
		system (NTSC).
		• HD : Color matrix is set same as a
		High-Definition system (ATSC).
		With a 480p signal from equipment connected
		to COMPONENT VIDEO INPUT (Y, PB, PR) or
	Color matrix	HDMI INPUT terminals or from the unit’s DTV
	Color matrix	tuner, you can select SD or HD color matrix to
		display the most natural color.

		Notes
		• This feature is available only with 480p signals.
		• The default setting with HDTV signals (720p,
		1080i or 1080p) is HD color matrix.
		• The default setting with NTSC signals (480i) is
		SD color matrix.
	Block NR	Reduces noise of specific digital signals of DVD,
		STB, etc.

	Mosquito NR	Reduces HDTV flicker noise in the contoured
		sections of an image.
		Select Light or Dark [Dark : VIDEO, Light :
	Black level	480i/480p/720p/1080i/1080p] Invalid for Digital
		channel, Analog channel, PC and Photo viewer.
	3:2 pulldown	Transfers film to video.