Panasonic TX-47P950A Connecting Headphones, Connect headphones as follows, Headphones plug

Before Operating This Set

Connecting the Aerial Cable to the RF in Terminal

VHF Aerial UHF Aerial Coaxial aerial plug

RF in

Terminal

Mixer

75 Ohm

RF in Terminal

Coaxial Cable

75 Ohm Coaxial Cable

Coaxial Aerial Plug

To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ohm coaxial) and the correct terminating plug are required.If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and your set.

Your local Television Service Centre or Dealer may be able to assist you in obtaining the correct Aerial system for your particular area and accessories required.

Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.

Connecting Headphones

Connect headphones as follows.

(3.5mm Plug)

(Optional) (not supplied)

You can listen to sound from the headphones plugs as shown below.

Screen condition				Speaker	Headphones	Monitor
				Sound		Output
Single		A		A	A	A
picture/Teletext				(Stereo)	(Stereo)	(Stereo)
Picture in				A	A	A
	A
Picture				(Stereo)	(Stereo)	(Stereo)
			B
Picture and				A	A	A
	A		B
Picture				(Stereo)	(Stereo)	(Stereo)

Headphones plug:

When a Headphones plug is inserted into the Headphones socket, all speakers will be automatically disconnected; only the Headphones will function.

Use Volume Up “+” or Down “-” button to control volume level.

5