Panasonic SC-BTX70 manual Setting the connection speed, Testing of Proxy Server Settings

Network settings

Setting the connection speed

When the connection test results in “Fail” after the IP and DNS-IP addresses are assigned, perform the following settings.

After performing steps 1 – 4 (> 31)

5Press [3, 4] to select “Connection Speed

Auto-Config” and press [2, 1] to select “Off”.

6Press [3, 4] to select “Connection Speed Setting” and press [2, 1] to select a

connection speed.

≥Select a connection speed in accordance with the environment of the network connected.

≥When the settings are changed, the network connection may be disabled depending on the device.

Testing of “Proxy Server Settings”

Always test the connection when new “Proxy Server

Settings” have been made.

1While stopped

Press [BD/SD] to select “BD/DVD”.

2Press [SETUP].

3Press [3, 4] to select “Network Settings” and press [OK].

4Press [3, 4] to select “Proxy Server Settings” and press [OK].

5Press [3, 4] to select “Connection Test” and press [OK].

			Proxy Server Settings
			Initialize
			Proxy Address
			Proxy Port Number	0
			Connection Test	----
			OK
			RETURN
operationsAdvanced	“Testing...”: The test is in progress.
	“Pass”:	The connection is completed.
	“Fail”:	Press [RETURN] to exit.
		Please check the connection and settings.

RQT9464

Setting the proxy server

In most cases, default settings can normally be used without making any changes.

Please use this setting when instructed to by your Internet service provider.

After performing steps 1 – 4 (> left)

5Press [3, 4] to select “Proxy Address” and press [OK].

≥The text entry screen is displayed.

Text field: shows the text you have entered

Proxy Address

_

1

1

2

3

4

5

6

7

8

9

0

2

A

B

C

a

b

c

+

-

*

3

D

E

F

d

e

f

/

=

%

4

G

H

I

g

h

i

#

$

&

Delete

5

J

K

L

j

k

l

<

>

@

Finish

6

M

N

O

m

n

o

[

]

_

7

P Q R S p q r s ( )

8

T

U

V

t

u

v

{

}

~

9

W X Y Z w x y z \

I

0

.

,

?

!

“

’

:

;

`

^

OK

Space

RETURN

0

-- 9

6Press [3, 4, 2, 1] to select a character and press [OK].

Repeat this step to enter other characters. ≥Press [;PAUSE] to delete.

7Press [∫STOP] when you complete the entry.

8 Press [3, 4] to select “Proxy Port Number” and press [OK].

9 Enter numbers with the numbered buttons and press [OK].

Proxy Port Number

Input HTTP Proxy server port number and press [OK]. The character below can be deleted with [CANCEL]. The number will be set to "0" if all characters are deleted and [OK] is pressed.

0

0 - 9 Number

:Press [2, 1] to select “Yes” and press [OK].

≥The specified ports may be blocked and not be able to be used depending on the network

TIPS environment.

In order to restore the default settings

After performing steps 1 – 4 (D left)

1)Press [3, 4] to select “Initialize” and press [OK].

2)Press [2, 1] to select “Yes” and press [OK].

Using the numbered buttons to enter characters

e.g., entering the letter “F”

1 1 2 3 4

3def 3def

2	A	B	C
3def 3	D	E	F

4 G H I

1)Press [3] to move to the 3rd row.

2)Press [3] twice to highlight “F”.

3)Press [OK].

32